この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 6896 は、ISO/TC 36 の映画撮影技術委員会によって作成されました。
1 適用範囲と適用分野
この国際規格は、35 mm 映画プロジェクター用の 2 種類の 16 歯の間欠スプロケットの寸法を規定しています。この国際規格は、ISO 491 に従って穴あきフィルムと組み合わせて使用されるスプロケットに適用されます。
2 参考資料
- ISO 491, 映画撮影 — 35 mm 映画フィルムおよび磁気フィルム — 切断および穿孔の寸法。
3 定義
この国際規格の目的のために、次の定義が適用されます。
間欠スプロケット : フィルムを周期的に (1 コマごとに) 送り出すために使用される送りスプロケット。
注 –スプロケットは通常、次の前進までの間隔中は完全に停止しています。フィルムをゼロ速度から加速し、フィルム送りの平均速度を達成する必要があるため、通常、動作の一部の間に大きな負荷がかかります。穴径の歪みが大きくなるため、谷径は送りスプロケットよりも大きくなるのが一般的です。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 6896 was prepared by Technical Committee ISO/TC 36, Cinematography.
1 Scope and field of application
This International Standard specifies the dimensions of two types of 16-tooth intermittent sprockets for 35 mm motionpicture projectors. This International Standard is applicable to sprockets used in conjunction with film perforated in accordance with ISO 491.
2 Reference
- ISO 491, Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions.
3 Definition
For the purpose of this International Standard the following definition applies.
intermittent sprocket : A feed sprocket used to advance the film periodically (frame-by-frame).
NOTE — The sprocket is usually completely at rest during the intervals between advances. It is normally heavily loaded during a portion of its motion since it has to accelerate the film from zero velocity and achieve an average rate of film advance. The root diameter is usually larger than that of a feed sprocket because of greater perforation distortion.