※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 6933 は、ISO/TC 17鋼技術委員会によって作成されました。
ユーザーは、特に明記されていない限り、すべての国際規格は随時改訂されること、および他の国際規格への言及はその最新版を意味することに留意する必要があります。
1 適用範囲と適用分野
1.1この国際規格は、車軸や車輪などの鉄道車両材料の磁粒子受け入れ試験による表面の不連続性の検出方法と手順を指定します (ISO 1005/3 および ISO 1005/6 を参照)
1.2別段の合意がない限り、この国際規格は、ISO 1005 のさまざまな部分に従って納入される製品に対して磁粉試験が合意または指定される場合に適用されます。
参考文献2件
- ISO 1005, 鉄道車両材料 —
Part 3: 牽引ストックおよびトレーリングストックの車軸 — 品質要件。
Part 6: 牽引ストックおよび牽引ストック用のソリッドホイール — 品質要件。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 6933 was prepared by Technical Committee ISO/TC 17, Steel.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
1.1 This International Standard specifies a method and procedure for detection of surface discontinuities by means of magnetic particle acceptance testing of railway rolling stock material such as axles and wheels (see ISO 1005/3 and ISO 1005/6).
1.2 Unless otherwise agreed, this International Standard shall be applied when magnetic particle tests are agreed or specified for products to be delivered in accordance with the various parts of ISO 1005.
2 References
- ISO 1005, Railway rolling stock material —
Part 3: Axles for tractive and trailing stock — Quality requirements.
Part 6: Solid wheels for tractive and trailing stock — Quality requirements.