※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 6934-3 は、技術委員会 ISO/TC 17, 鋼、小委員会 SC 16, コンクリートの補強およびプレストレスト用鋼によって作成されました。
ISO 6934 は、一般タイトル「コンクリートのプレストレス処理用鋼」の下に、次の部分で構成されています。
- Part 1: 一般要件
- Part 2: 冷間引抜線
- Part 3: 焼き入れ焼き戻し線
- Part 4: ビーチ
- Part 5: 後処理の有無にかかわらず、熱間圧延棒鋼
ISO 6934 のこの部分の付録 A は情報提供のみを目的としています。
1 スコープ
ISO 6934 のこの部分では、表面が平坦、リブ付き、溝付き、または凹凸のある、焼入れおよび焼き戻しされた高張力鋼で作られた丸線の要件を指定しています。製品は、ISO 6934-1 で指定された一般要件に従って、コイルで納品されます。
2 規範的参照
以下の規格には、本書での参照を通じて ISO 6934 のこの部分の規定を構成する規定が含まれています。発行時点では、示されている版は有効でした。すべての規格は改訂される可能性があり、ISO 6934 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 6934-1:1991, コンクリートのプレストレスト用鋼 - Part 1: 一般要件。
- ISO 7801:1984, 金属材料 - ワイヤー - 逆曲げ試験。
- ISO 10065:1990, コンクリート補強用鋼棒 - 曲げおよび再曲げ試験。
3 つの定義
ISO 6934 のこの部分の目的のために、ISO 6934-1 に示されている定義と次の定義が適用されます。
3.1
溝付きワイヤー
表面に長さ方向に沿って連続した螺旋状の溝があるワイヤー。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 6934-3 was prepared by Technical Committee ISO/TC 17, Steel, Sub-Committee SC 16, Steels for the reinforcement and prestressing of concrete.
ISO 6934 consists of the following parts, under the general title Steel for the prestressing of concrete:
- Part 1: General requirements
- Part 2: Cold-drawn wire
- Part 3: Quenched and tempered wire
- Part 4: Strand
- Part 5: Hot-rolled steel bars with or without subsequent processing
Annex A of this part of ISO 6934 is for information only.
1 Scope
This part of ISO 6934 specifies requirements for round wire made of quenched and tempered high tensile steel, with a surface which is either plain, ribbed, grooved or indented. The product is delivered in coils, according to the general requirements specified in ISO 6934-1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 6934. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 6934 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 6934-1:1991, Steel for the prestressing of concrete — Part 1: General requirements.
- ISO 7801:1984, Metallic materials — Wire — Reverse bend test.
- ISO 10065:1990, Steel bars for reinforcement of concrete — Bend and rebend tests.
3 Definitions
For the purposes of this part of ISO 6934, the definitions given in ISO 6934-1 and the following definition apply.
3.1
grooved wire
Wire whose surface has continuous helical grooves along the length.