※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 6934-5 は、コンクリートの補強とプレストレスのための鋼に関する技術委員会 ISO/TC 17, 鉄鋼、小委員会 SC 16, 鋼によって作成されました。
ISO 6934 は、次の部分で構成されており、一般的なタイトルはコンクリートのプレストレス用鋼です。
- Part 1: 一般要件
- Part 2: 冷間引抜き線
- Part 3: 焼入れ焼戻し線
- Part 4: ビーチ
- Part 5: 後処理ありまたはなしの熱間圧延棒鋼
1 スコープ
ISO 6934 のこのパートでは、丸型高張力鋼棒の要件を指定しています。バーは、ISO 6934-1 で指定された一般的な要件に従って、熱間圧延または熱間圧延および加工された状態で供給されます。表面は無地またはリブがあります。
バーはストレートの長さで提供されます。
2 参考文献
以下の規格には、このテキストで参照することにより、ISO 6934 のこの部分の規定を構成する規定が含まれています。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 6934 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 6934-1:1991, コンクリートのプレストレス用鋼 — 1: 一般要件。
- ISO 10065:1990, コンクリート補強用鉄筋 - 曲げおよび再曲げ試験。
3 つの定義
ISO 6934 のこの部分の目的のために、ISO 6934-1 で与えられた定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 6934-5 was prepared by Technical Committee ISO/TC 17, Steel, Sub-Committee SC 16, Steels for the reinforcement and prestressing of concrete.
ISO 6934 consists of the following parts, under the general title Steel for the prestressing of concrete:
- Part 1: General requirements
- Part 2: Cold-drawn wire
- Part 3: Quenched and tempered wire
- Part 4: Strand
- Part 5: Hot-rolled steel bars with or without subsequent processing
1 Scope
This part of ISO 6934 specifies requirements for round high tensile steel bars. The bars may be supplied either hot-rolled or in a hot-rolled and processed condition, according to the general requirements specified in ISO 6934-1. The surface may be plain or ribbed.
The bars are delivered in straight lengths.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 6934. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 6934 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 6934-1:1991, Steel for the prestressing of concrete — 1: General requirements.
- ISO 10065:1990, Steel bars for reinforcement of concrete — Bend and rebend tests.
3 Definitions
For the purposes of this part of ISO 6934, the definitions given in ISO 6934-1 apply.