※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 6935-1 は、技術委員会 ISO/TC 17, 鋼、小委員会 SC 16, コンクリートの補強およびプレストレスト用鋼によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 6935-1:1991) を廃止し、置き換えます。
ISO 6935 は、 「コンクリート補強用鋼」という一般タイトルのもと、次の部分で構成されています。
- Part 1: 普通棒
- Part 2: リブ付きバー
- Part 3: 溶着生地
1 スコープ
ISO 6935 のこの部分では、コンクリートの補強材として使用される平筋に関する技術要件が規定されています。
ISO 6935 のこの部分では、溶接を目的としない 9 つの鋼種 (B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P, および B420D-P) と、溶接を目的とした 1 つの鋼種 (B420DWP) が対象になります。製造工程はメーカーの裁量に任されております。 ISO 6935 のこの部分の要件は、コイル状で供給されるプレーンバーにも適用されます。鋼種は ISO/TS 4949 に従って割り当てられた鋼名で指定されます。
注最初の「B」は鉄筋コンクリート用鋼を表します。次の 3 桁は、指定された上降伏強さの特性値を表します。 5 番目の文字は延性クラス (4.4) を表します。次の記号は溶接に関連しています。 「-」は溶接を目的としていないことを意味し、「W」は溶接を目的としていることを意味します。最後の「P」はプレーンバーを表します。
ISO 6935 のこの部分は、ストレート長で納入される製品を対象としています。
プレートや鉄道レールなどの完成品から製造される平棒は除きます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 404, 鉄鋼および鉄鋼製品 — 一般的な技術提供要件
- ISO/TS 4949, 文字記号に基づく鋼の名前
- ISO/TR 9769, 鋼鉄および鉄 — 利用可能な分析方法のレビュー
- ISO 10144, コンクリート構造物の補強用棒鋼および鋼線の認証スキーム
- ISO 14284, 鋼と鉄 - 化学組成測定のためのサンプルのサンプリングと準備
- ISO 15630-1, コンクリートの補強およびコンクリートのプレストレス処理用鋼 — 試験方法 — Part 1: 鉄筋、線材およびワイヤー
4 用語と定義
この文書の目的上、次の用語と定義が適用されます。
4.1
キャスト分析
鉄鋼メーカーが独自の手順に従って決定した鋳造品を代表する化学分析
[出典:ISO 16020:2005]
4.2
認証制度
同じ特定の基準と規則、および同じ手順が適用される特定の製品、プロセス、またはサービスに関連する認証システム
4.3
特性値
仮定上の無制限のテストシリーズでは達成されない所定の確率を持つ値
[出典:ISO 16020:2005]
注記 1: ISO 3534-1 で定義されているフラクタイルと同等。
注記 2:公称値は、状況によっては特性値として使用されます。
4.4
延性クラス
引張強さと降伏強さの比の値、およびA gtまたはA 5として測定された伸びに基づいた鉄筋の延性特性の分類
4.5
製品分析
製品に対して行われる化学分析
[出典:ISO 16020:2005]
参考文献
| 1 | ISO 3534-1, 統計 - 語彙と記号 - Part 1: 一般的な統計用語と確率で使用される用語 |
| 2 | ISO 16020, コンクリートの補強およびプレストレスト用鋼 — 語彙 |
| 3 | ISO/IEC Guide 2, 標準化および関連活動 - 一般用語 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6935-1 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 16, Steels for the reinforcement and prestressing of concrete.
This second edition cancels and replaces the first edition (ISO 6935-1:1991), which has been technically revised.
ISO 6935 consists of the following parts, under the general title Steel for the reinforcement of concrete:
- Part 1: Plain bars
- Part 2: Ribbed bars
- Part 3: Welded fabric
1 Scope
This part of ISO 6935 specifies technical requirements for plain bars to be used as reinforcement in concrete.
This part of ISO 6935 covers nine steel grades not intended for welding which are B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P, and one steel grade intended for welding which is B420DWP. The production process is at the discretion of the manufacturer. It also applies to plain bars supplied in coil form. The requirements of this part of ISO 6935 apply to straightened product. The steel grades are designated with steel names allocated in accordance with ISO/TS 4949.
NOTE The first “B” stands for steel for reinforcing concrete. The next 3 digits represent the specified characteristic value of upper yield strength. The fifth letter stands for ductility class (4.4). The next symbol relates to welding; “-” means not intended for welding and “W” means intended for welding. The last “P” stands for plain bar.
This part of ISO 6935 covers products delivered in straight lengths.
Plain bars produced from finished products, such as plates and railway rails, are excluded.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 404, Steel and steel products — General technical delivery requirements
- ISO/TS 4949, Steel names based on letter symbols
- ISO/TR 9769, Steel and iron — Review of available methods of analysis
- ISO 10144, Certification scheme for steel bars and wires for the reinforcement of concrete structures
- ISO 14284, Steel and iron — Sampling and preparation of samples for the determination of chemical composition
- ISO 15630-1, Steel for the reinforcement of concrete and prestressing of concrete — Test methods — Part 1: Reinforcing bars, wire rod and wire
4 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
4.1
cast analysis
chemical analysis representative of the cast determined by the steelmaker in accordance with his own procedures
[SOURCE:ISO 16020:2005]
4.2
certification scheme
certification system as related to specified products, processes or services to which the same particular standards and rules, and the same procedure, apply
4.3
characteristic value
value having a prescribed probability of not being attained in a hypothetical unlimited test series
[SOURCE:ISO 16020:2005]
Note 1 to entry: Equivalent to fractile, which is defined in ISO 3534-1.
Note 2 to entry: A nominal value is used as the characteristic value in some circumstances.
4.4
ductility class
classification of the ductility properties of reinforcing steels based on the value of the ratio of tensile strength to yield strength, as well as the elongation measured either as Agt or as A5
4.5
product analysis
chemical analysis carried out on the product
[SOURCE:ISO 16020:2005]
Bibliography
| 1 | ISO 3534-1, Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
| 2 | ISO 16020, Steel for the reinforcement and prestressing of concrete — Vocabulary |
| 3 | ISO/IEC Guide 2, Standardization and related activities — General vocabulary |