※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7087は、技術委員会 ISO/TC 132, 合金鉄によって作成されました。
1 適用範囲と適用分野
この国際規格は、関連する国際規格で与えられた無作為抽出および 2 段階抽出のパラメータを決定する目的で、合金鉄の品質変動を評価するための実験方法を規定しています。また、ランダム法と 2 段階法によるサンプル採取の精度をチェックする方法も規定されています。
2 参考文献
- ISO 3713, フェロアロイ - サンプリングとサンプル準備 - 一般規則。1)
- ISO 4552/1, フェロアロイ — 化学分析のためのサンプリングとサンプル準備 — 1: フェロクロム、フェロシリコクロム、フェロシリコン、フェロシリコマンガン、フェロマンガン。1)
- ISO 4552/2, フェロアロイ — 化学分析のためのサンプリングとサンプル準備 — 2: フェロチタン、フェロモリブデン、フェロタングステン、フェロニオブ、フェロバナジウム。1)
- ISO 5445, フェロシリコーン配送 — 配送の仕様と条件。
- ISO 5446, フェロマンガン — 仕様および納入条件。
- ISO 5447, フェロシリコマンガン — 仕様および納入条件。
- ISO 5448, フェロクロム — 仕様と配送条件。
- ISO 5449, フェロシリコクロム — 仕様および納入条件。
- ISO 5450, フェローテーション試験 — 仕様および納入条件。
- ISO 5451, フェロバナジウム — 仕様と配送条件。
- ISO 5452, フェロモリブデン — 仕様および納入条件。
- ISO 5453, フェロニオブ — 仕様および納入条件。
- ISO 5454, フェロチタン — 仕様と配送条件。
- ISO 7347, フェロアロイ — サンプリングとサンプル準備の偏りをチェックするための実験方法。1)
- ISO 7373, フェロアロイ — サンプル分割の精度を確認するための実験方法。1)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7087 was prepared by Technical Committee ISO/TC 132, Ferroalloys.
1 Scope and field of application
This International Standard specifies experimental methods for the evaluation of quality variation of ferroalloys for the purposes of determining the parameters of random sampling and two-stage sampling given in the relevant International Standards. It also specifies the methods for checking the precision of taking samples by the random method and two-stage method.
2 References
- ISO 3713, Ferroalloys — Sampling and sample preparation — general rules.1)
- ISO 4552/1, Ferroalloys — Sampling and sample preparation for chemical analysis — 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese and ferromanganese.1)
- ISO 4552/2, Ferroalloys — Sampling and sample preparation for chemical analysis — 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium and ferrovanadium.1)
- ISO 5445, Ferrosilicon delivery — Specification and conditions of delivery.
- ISO 5446, Ferromanganese — Specification and conditions of delivery.
- ISO 5447, Ferrosilicomanganese — Specification and conditions of delivery.
- ISO 5448, Ferrochromium — Specification and conditions of delivery.
- ISO 5449, Ferrosilicochromium — Specification and conditions of delivery.
- ISO 5450, Ferrotungsten — Specification and conditions of delivery.
- ISO 5451, Ferrovanadium — Specification and conditions of delivery.
- ISO 5452, Ferromolybdenum — Specification and conditions of delivery.
- ISO 5453, Ferroniobium — Specification and conditions of delivery.
- ISO 5454, Ferrotitanium — Specification and conditions of delivery.
- ISO 7347, Ferroalloys — Experimental methods for checking the bias of sampling and sample preparation.1)
- ISO 7373, Ferroalloys — Experimental methods for checking the precision of sample division.1)