※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 7136 は、技術委員会 ISO/TC 127, 土工機械、小委員会 SC 4, 商業命名法、分類および評価によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 7136:1998) を廃止し、置き換えるものです。
1 スコープ
この国際規格は、自走式パイプ敷設業者とその機器に関する用語と商業文献仕様の内容を確立します。 ISO 6165 で定義されているパイプレイヤーに適用されます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6014, 土工機械 - 対地速度の決定
- ISO 6016:1998, 土工機械 - 機械全体、その装置およびコンポーネントの質量を測定する方法
- ISO 6165:2006, 土工機械 - 基本タイプ - 識別と用語と定義
- ISO 674, 土工機械 - 寸法とコードの定義
- ISO 9249, 土工機械 — エンジン試験コード — 正味出力
3 用語と定義
この文書の目的のために、ISO 6165 および以下に示されている用語と定義が適用されます。
3.1 一般
3.1.1
パイプレイヤー
主にパイプの取り扱いと敷設のために設計された、メインフレーム、荷重ホイスト機構、垂直方向に旋回可能なサイドブームおよびカウンターウェイトを備えたパイプ敷設装置を備えた自走式クローラーまたは車輪付き機械
[出典:ISO 6165:2006, 定義 4.11]
3.1.2
回転パイプレイヤー
メインフレームを備えたパイプ敷設装置、荷ホイストドラムまたはウインチのいずれかを備えた荷ホイスト機構、回転する上部構造に取り付けられた垂直方向に旋回可能なブーム、および主にパイプの取り扱いと敷設のために設計されたカウンターウェイトを備えた自走式クローラまたは車輪付き機械
[出典:ISO 6165:2006, 定義 4.12]
3.1.3
サイドブーム
トラクターまたはローダー (ホイールまたはクローラー型の機械) に追加される装置。パイプの取り扱いと敷設、およびパイプ敷設装置の運搬を目的として設計されています。
注記 1: この装置には、ブームおよび荷物ホイスト機構、および垂直方向に旋回可能なサイドブームが含まれます。カウンタウェイトの有無にかかわらず使用できます。
3.1.4
回転式上部構造
機械の上部。機械の長手方向軸を通る垂直軸の周りで少なくとも 90 度回転することができます。
注記 1: これには、機械のキャブ、ブーム、およびカウンターウェイトが含まれます。
3.1.5
ベースマシン
キャブまたはキャノピー、および必要に応じてオペレーター保護構造を備えた機械。機器や付属品はありませんが、そのような機器や付属品に必要な取り付け具を備えた機械
3.1.6
装置
パイプレイヤーの主な設計機能を果たすためにベースマシンに取り付けられた一連のコンポーネント (ブームとカウンターウェイト)
注記 1:パイプ敷設用の機器には、荷ホイストドラムまたはウインチのいずれかおよび垂直に旋回可能なサイドブームを備えた荷ホイスト機構が含まれます。
3.1.7
ブーム
荷重を支える固定長の構造部材
3.1.8
カウンタウェイト
転倒荷重を増加させるために追加の取り外し可能なウェイトとその取り外し可能な (または固定された) サポートが追加された場合
注記 1: カウンタウェイトには 2 つのタイプがあり、3.1.8.1 および 3.1.8.2 で定義されています。
3.1.8.1
調整可能なカウンターウェイト
カウンタウェイトのその部分は可動です
3.1.8.2
調整不可能なカウンターウェイト
カウンタウェイトは機械の 1 か所に固定されています
3.1.9
アタッチメント
特定の用途のためにベースマシンまたは機器に取り付けることができるコンポーネントのアセンブリ
3.1.10
コンポーネント.コンポーネント
ベースマシン、機器、または付属品の部品または部品のアセンブリ
3.2 質量
3.2.1
動作質量
メーカーが指定した機器と空のアタッチメントを備えたベースマシンの質量、およびオペレータ (75 kg)、満タンの燃料タンクとメーカーが指定したレベルのすべての流体システムを備えた質量
[出典:ISO 6016:1998, 定義 3.2.1]
3.2.2
出荷質量
オペレーターなしのベースマシンの質量、タンク容量の 10% の燃料レベル、メーカーが指定したレベルのすべての流体システム、およびメーカーが指定した機器、アタッチメント、キャブ、キャノピー、ROPS および/または FOPS, ホイール、カウンターウェイトの有無にかかわらず
[出典:ISO 6016:1998, 定義 3.2.5]
3.3 寸法
パイプレイヤーに厳密に関連する寸法の定義とコードについては、以下が適用されます。寸法とコードの定義については、ISO 6746-1 および ISO 6746-2 も参照してください。
3.3.1
カウンタウェイトを除いた全幅
W
図 1 —寸法W 1
3.3.2
カウンタウェイトを格納した状態の幅
第二次世界大戦
ブームを取り外し、調整可能なカウンタウェイトを格納した状態の機械の全幅
図 2 —車輪付き機械およびクローラ機械の寸法WW 2
a)クローラーマシンの寸法WW 2
b)車輪付き機械の寸法WW 2
3.3.3
カウンタウェイトを伸ばした状態の幅
第三次世界大戦
ブームを取り外し、調整可能なカウンターウェイトを伸ばした状態の機械の全幅
図 3 —車輪付き機械およびクローラ機械の寸法WW 3
a)クローラーマシンの寸法WW 3
b)車輪付き機械の寸法WW 3
3.3.4
荷重オーバーハング距離
第4次世界大戦
リフトポイントラインから機械のブーム側の外側トラックリンクレールの外端までの水平および垂直距離
図 4 —クローラー マシンの寸法WW 4
3.3.5
荷重オーバーハング距離
第4次世界大戦
リフトポイント線から機械のブーム側の前後タイヤの中心線を結んだ線までの水平および垂直距離
図 5 —ホイール付き機械の寸法WW 4
a)ブームから遠ざけた関節式車輪付きトラクター | b)ブームに向けて操縦される関節式車輪付きトラクター |
Key
| 1 | リフトポイント |
3.3.6
荷重オーバーハング距離
第4次世界大戦
図 6 —アウトリガーが真っすぐに操縦された機械の寸法WW 4
Key
| 1 | リフトポイント |
| 2 | アウトリガー |
3.3.7
ブームの長さ
LL1
図 7 —寸法LL 1
3.3.8
出荷時の高さ
H
図 8 —クローラーマシンの寸法H 3
3.3.9
出荷時の高さ
H
図 9 —ホイール付き機械の寸法H 3
3.3.10
より高い身長
H
図 10 —寸法H 5
3.3.11
格納されたカウンターウェイトの上部までの高さ
HH3
図 11 —寸法HH 3
3.3.12
拡張カウンターウェイトの下のクリアランス
HH4
図 12 —寸法HH 4
3.3.13
最大フック高さ
HH5
図 13 —寸法HH 5
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7136 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 4, Commercial nomenclature, classification and rating.
This third edition cancels and replaces the second edition (ISO 7136:1998), which has been technically revised.
1 Scope
This International Standard establishes terminology and the content of commercial literature specifications for self-propelled pipelayers and their equipment. It is applicable to pipelayers as defined in ISO 6165.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6014, Earth-moving machinery — Determination of ground speed
- ISO 6016:1998, Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components
- ISO 6165:2006, Earth-moving machinery — Basic types — Identification and terms and definitions
- ISO 6746 (all parts), Earth-moving machinery — Definitions of dimensions and codes
- ISO 9249, Earth-moving machinery — Engine test code — Net power
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6165 and the following apply.
3.1 General
3.1.1
pipelayer
self-propelled crawler or wheeled machine, having pipe-laying equipment with main frame, load-hoist mechanism, vertically pivotable side boom and counterweight, primarily designed to handle and lay pipes
[SOURCE:ISO 6165:2006, definition 4.11]
3.1.2
rotating pipelayer
self-propelled crawler or wheeled machine, having pipe-laying equipment with main frame, load hoist mechanism with either a load hoist drum or a winch, vertically pivotable boom, fitted on a rotating upper structure, and counterweight, primarily designed to handle and lay pipes
[SOURCE:ISO 6165:2006, definition 4.12]
3.1.3
side boom
equipment added to a tractor or a loader (wheel or crawler type machine), which is designed to handle and lay pipes and carry pipe-laying equipment
Note 1 to entry: The equipment includes boom and load hoist mechanisms and a vertically pivotable side boom. It can be with or without counterweights.
3.1.4
rotating upper structure
upper portion of the machine, capable of at least 90° rotation around a vertical axis passing through the longitudinal axis of the machine
Note 1 to entry: It includes machine cab, boom and counterweight(s).
3.1.5
base machine
machine with a cab or canopy and operator-protective structures if required, without equipment and attachments but possessing the necessary mountings for such equipment and attachments
3.1.6
equipment
set of components (boom and counterweights) mounted onto the base machine to fulfil the primary design function of a pipelayer
Note 1 to entry: Equipment for pipelayers includes load hoist mechanisms with either a load hoist drum or a winch and a vertically pivotable side boom.
3.1.7
boom
fixed length structural member that supports the load
3.1.8
counterweight
any additional removable weight and its removable (or fixed) support added to increase tipping load
Note 1 to entry: There are two types of counterweights, defined in 3.1.8.1 and 3.1.8.2.
3.1.8.1
adjustable counterweight
that portion of the counterweight that is movable
3.1.8.2
nonadjustable counterweight
counterweight fixed in one location on the machine
3.1.9
attachment
assembly of components that can be mounted on the base machine, or equipment, for a specific use
3.1.10
component
part or an assembly of parts of a base machine, equipment or attachment
3.2 Masses
3.2.1
operating mass
mass of the base machine with equipment and empty attachment as specified by the manufacturer, and with the operator (75 kg), full fuel tank and all fluid systems at the levels specified by the manufacturer
[SOURCE:ISO 6016:1998, definition 3.2.1]
3.2.2
shipping mass
mass of the base machine without an operator, and with fuel level at 10 % of tank capacity, all fluid systems at their levels specified by the manufacturer and with or without equipment, attachment, cab, canopy, ROPS and/or FOPS, wheels and counterweights as stated by the manufacturer
[SOURCE:ISO 6016:1998, definition 3.2.5]
3.3 Dimensions
For definitions and codes of dimensions strictly related to pipelayers, the following apply. See also ISO 6746-1 and ISO 6746-2 for definitions of dimensions and codes.
3.3.1
overall width without counterweight
W 1
Figure 1 — Dimension W 1
3.3.2
width with counterweight retracted
WW 2
overall width of the machine with the boom removed and the adjustable counterweight retracted
Figure 2 — Dimension WW 2 for wheeled and crawler machines
a)Dimension WW 2 for crawler machine
b)Dimension WW 2 for wheeled machine
3.3.3
width with counterweight extended
WW 3
overall width of the machine with the boom removed and the adjustable counterweight extended
Figure 3 — Dimension WW 3 for wheeled and crawler machines
a)Dimension WW 3 for crawler machine
b)Dimension WW 3 for wheeled machine
3.3.4
load overhang distance
WW 4
horizontal and perpendicular distance from the lift point line to the outer edge of the outer track link rail on the boom side of the machine
Figure 4 — Dimension WW 4 for crawler machine
3.3.5
load overhang distance
WW 4
horizontal and perpendicular distance from the lift point line to a line connecting the centreline of the front and rear tires on the boom side of the machine
Figure 5 — Dimension WW 4 for wheeled machine
a)Articulated wheeled tractor steered away from boom | b)Articulated wheeled tractor steered toward boom |
Key
| 1 | lift point |
3.3.6
load overhang distance
WW 4
Figure 6 — Dimension WW 4 for machine with outriggers steered straight
Key
| 1 | lift point |
| 2 | outriggers |
3.3.7
length of boom
LL 1
Figure 7 — Dimension LL 1
3.3.8
shipping height
H 3
Figure 8 — Dimension H 3 for crawler machine
3.3.9
shipping height
H 3
Figure 9 — Dimension H 3 for wheeled machine
3.3.10
grouser height
H 5
Figure 10 — Dimension H 5
3.3.11
height to top of retracted counterweight
HH 3
Figure 11 — Dimension HH 3
3.3.12
clearance under the extended counterweights
HH 4
Figure 12 — Dimension HH 4
3.3.13
maximum hook height
HH 5
Figure 13 — Dimension HH 5