この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7226 は、技術委員会 ISO/TC 29, 小型ツールによって作成されました。
この第 2 版は、第 1 版 (ISO 7226:1985) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。
ユーザーは、すべての国際規格が随時改訂されること、および他の国際規格への参照は、別段の記載がない限り、その最新版を意味することに注意する必要があります。
1 適用範囲と適用分野
この国際規格は、特定のサイズの ISO メトリックねじ (コースおよびファイン ピッチ シリーズ — ISO 68 および ISO 261 を参照)、ISO インチねじ (UNC および UNF シリーズ — ISO 68 および ISO 263 を参照)、および管用ねじ (G および R シリーズ — ISO 7-1 および ISO 228-1 を参照)、および非優先ねじサーレス BSW, BSF, および B
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7226 was prepared by Technical Committee ISO/TC 29, Small tools.
This second edition cancels and replaces the first edition (ISO 7226: 1985), of which it constitutes a minor revision.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
This International Standard specifies the general dimensions of hexagonal dienuts for certain sizes of ISO metric threads (coarse and fine pitch series — see ISO 68 and ISO 261), ISO inch threads (UNC and UNF series — see ISO 68 and ISO 263), and pipe threads (G and R series — see ISO 7-1 and ISO 228-1), as well as the non-preferred thread serles BSW, BSF and BA.