この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7246 は、技術委員会 ISO/TC 138, 流体輸送用のプラスチック パイプ、継手およびバルブによって作成されました。
1 適用範囲と適用分野
この国際規格は、パイプおよび付属品のアクリロニトリル/スチレン (または置換スチレン)/アクリルエステルの一般仕様を確立します。
与えられた値は、設計目的には使用されません。
この国際規格は、以下には適用されません。
- a)連続相に 20% 未満のアクリロニトリルを含む材料;
- b)連続相に 5% を超える別のコモノマーまたはポリマーを含む材料。
- c)難燃剤を含む材料;
- d)繊維を含む材料。
2 参考文献
- ISO 178, プラスチック — 硬質プラスチックの曲げ特性の決定。
- ISO 179, プラスチック — 硬質材料のシャルピー衝撃強さの測定。
- ISO 180, プラスチック — 硬質材料の高衝撃強度の測定。
- ISO 291, プラスチック — コンディショニングとテスト用の標準雰囲気。
- ISO 306, プラスチック — 熱可塑性樹脂のビカット軟化温度の決定。
- ISO 1133, プラスチック - 熱可塑性樹脂のメルト フロー レートの測定。
- ISO 2557/2, プラスチック — 非晶性熱可塑性成形材料 — 定義された収縮レベルの試験片の準備 — 2: 長方形のプレートの形の試験片 (射出成形)
- ISO 2580/1, プラスチック — アクリロニトリル - ブタジエン - スチレン (ABS) 成形材料および押出材料 — 1: 指定。
- ISO 2580/2, プラスチック — アクリロニトリル - ブタジエン - スチレン (ABS) 成形材料および押出材料 — 2: プロパティの決定。
3 定義
ASAプラスチックス
連続相がスチレンおよび/または置換スチレンとアクリロニトリルのコポリマーからなり、分散エラストマー相が耐衝撃性改良剤としてのアクリルエステルのポリマーまたはコポリマーに基づく二相系。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7246 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids.
1 Scope and field of application
This International Standard establishes a general specification for acrylonitrile/styrene (or substituted styrene)/acrylester for pipes and fittings.
The values given shall not be used for design purposes.
This International Standard does not apply to
- a) materials containing less than 20 % acrylonitrile in the continuous phase;
- b) materials containing more than 5 % of another comonomer or polymer in the continuous phase;
- c) materials containing flame retardants;
- d) materials containing fibres.
2 References
- ISO 178, Plastics — Determination of flexural properties of rigid plastics.
- ISO 179, Plastics — Determination of Charpy impact strength of rigid materials.
- ISO 180, Plastics — Determination of hod impact strength of rigid materials.
- ISO 291, Plastics — Standard atmospheres for conditioning and testing.
- ISO 306, Plastics — Determination of the Vicat softening temperature of thermoplastics.
- ISO 1133, Plastics — Determination of the melt flow rate of thermoplastics.
- ISO 2557/2, Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — 2: Test specimens in the form of rectangular plates (Injection moulding).
- ISO 2580/1, Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — 1: Designation.
- ISO 2580/2, Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — 2: Determination of properties.
3 Definition
ASA plastics
Two-phase system in which the continuous phase consists of copolymers of styrene and/or substituted styrene and acrylonitrile, and the dispersed elastomeric phase is based on a polymer or copolymer of an acrylester as the impact modifier.