この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7382 は、技術委員会 ISO/TC 47, 化学によって作成されました。
ユーザーは、すべての国際規格が随時改訂されること、および他の国際規格への参照は、別段の記載がない限り、その最新版を意味することに注意する必要があります。
警告 - この国際規格で説明されている運用技術を実践する際には、現在の公式規則を考慮することが必須です。
1 適用範囲と適用分野
この国際規格は、水分含有量、その他の極性成分の測定を除く分析の目的で、-100 °C で保存された液相および気相のエチレンの代表的なサンプルを抽出する際の手順と注意事項について説明しています。および C 5より重い炭化水素 [水または極性化合物を測定するためのサンプルの調製については、ISO 8916 を使用します (5 節を参照)
また、分析に使用されなかったサンプル部分を除去するためのシステムの概略図を付属書に示しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part In the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7382 was prepared by Technical Committee ISO/TC 47, Chemistry.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
WARNING - In putting the operating techniques described in this International Standard into practice, it is mandatory to take account of the current official regulations.
1 Scope and field of application
This International Standard describes the procedures and the precautions to be taken in drawing representative samples of ethylene in the liquid phase stored at - 100 °C and in the gaseous phase, for the purpose of their analysis excluding the determination of water content, other polar components and hydrocarbons heavier than C5 [for the preparation of samples for the determination of water or polar compounds, use ISO 8916 (see clause 5)].
It also sets out, in annex, a diagrammatic representation of a system for the removal of the portion of the sample not used in the analysis.