※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気技術委員会 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 7437 は、技術委員会 ISO/TC 10, 技術図面、製品定義、および関連文書によって作成されました。
1 スコープ
この国際規格は、プレハブ構造コンポーネントの製造図面の実行に関する一般規則を確立しています。
このようなプレハブ コンポーネントのドキュメントには、図面、仕様、およびスケジュールが含まれます。この国際規格は、図面のみを扱います。
注記 1仕様書とスケジュールは、別個の文書として、または図面シートの追加情報として作成することができます。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 128:1982, テクニカル ドローイング - プレゼンテーションの一般原則。
- ISO 3766:1977, 建物および土木工学の図面 - コンクリート補強の記号。
- ISO 5455:1979, 技術図面 - スケール。
- ISO 5457:1980, 技術図面 - 図面シートのサイズとレイアウト。
- ISO 6284:1985, 建物の公差 - 建物および建設図面の公差の表示。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnicai Commission (IEC) on all matters of electrotechnicai standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 7437 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation.
1 Scope
This International Standard establishes general rules for the execution of production drawings for prefabricated structural components.
The documentation for such prefabricated components includes drawings, specifications and schedules. This International Standard deals only with drawings.
NOTE 1 Specifications and schedules may be prepared as separate documents, or as additional information on the drawing sheet.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 128:1982, Technical drawings - General principles of presentation.
- ISO 3766:1977, Building and civil engineering drawings - Symbols for concrete reinforcement.
- ISO 5455:1979, Technical drawings - Scales.
- ISO 5457:1980, Technical drawings - Sizes and layout of drawing sheets.
- ISO 6284:1985, Tolerances for building - Indication of tolerances on building and construction drawings.