この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7487/3 は、技術委員会 ISO/TC 97, 情報処理システムによって作成されました。
この第 2 版は、第 1 版 (ISO 7487/3-1984) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。
ユーザーは、すべての国際規格が随時改訂されること、および他の国際規格への参照は、別段の記載がない限り、その最新版を意味することに注意する必要があります。
1 適用範囲と適用分野
ISO 7487 のこの部分は、データ処理システム間のデータ交換を目的とした 130 mm (5.25 インチ) フレキシブル ディスク カートリッジで使用される、記録された信号の品質、トラック レイアウト、およびトラック フォーマットを指定します。
注 -この国際規格の SI および/またはインペリアル測定システムの数値は四捨五入されている可能性があるため、互いに一致していますが、正確に等しいわけではありません。どちらのシステムも使用できますが、2 つを混在させたり、再変換したりしないでください。 ISO 7487 のこの部分の元の設計は、SI 単位を使用して作成されました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7487/3 was prepared by Technical Committee ISO/TC 97, Information processing systems.
This second edition cancels and replaces the first edition (ISO 7487/3-1984), of which it constitutes a minor revision.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
This part of ISO 7487 specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange between data processing systems.
NOTE — Numeric values in the SI and/or Imperial measurement system in this International Standard may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor re-converted. The original design of this part of ISO 7487 was made using SI units.