※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7616 は、ISO/TC 61プラスチック技術委員会によって作成されました。
これは、技術改訂版であるテクニカル レポート ISO/TR 2799-1978 を取り消し、置き換えるものです。
ユーザーは、特に明記されていない限り、すべての国際規格は随時改訂されること、および他の国際規格への言及はその最新版を意味することに留意する必要があります。
1 適用範囲と適用分野
この国際規格は、指定された荷重および温度条件下での硬質気泡プラスチックの圧縮クリープを測定する方法を指定しています。この方法は、建物の断熱材に使用される材料のクリープ抵抗を測定するために使用されます (ISO 4898 を参照)
参考文献2件
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7616 was prepared by Technical Committee ISO/TC 61, Plastics.
It cancels and replaces Technical Report ISO/TR 2799-1978, of which it constitutes a technical revision.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
This International Standard specifies a method for the determination of compressive creep of rigid cellular plastics under specified load and temperature conditions. This method is for use in measuring the creep resistance of materials to be used in the thermal insulation of buildings (see ISO 4898).
2 References
- ISO 291, Plastics — Standard atmospheres for conditioning and testing.
- ISO 1923, Rigid cellular plastics and rubbers — Determination of linear dimensions.
- ISO 4898, Rigid cellular plastics — Specification for materials used in the thermal insulation for buildings.
- ISO 7850, Cellular plastics, rigid — Determination of compressive creep.