※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 7642 は、ISO/TC 22, 道路車両技術委員会によって作成されました。
この第 2 版は、第 1 版 (ISO 7642:1983) を取り消して置き換えるもので、特定の値が変更され、前の第 8 条が削除され、参照が更新されています。
1 スコープ
この国際規格は、トレーラーのオーバーラン ブレーキの型式承認試験の試験方法を規定しています。したがって、関連する規制と関連付けて使用する必要があります。 1)
ノート
- 1この国際規格の要件を十分に理解し、試験手順が正しく適用されていることを確認するために、この国際規格を適用する前に規制を検討することをお勧めします。
- 2この国際規格では SI 単位のみが使用されます。これらの試験方法は、慣性動力計で試験することにより、カテゴリー O 1および O 21)の慣性ブレーキ付きトレーラーの型式承認に適用されます。これらは、機械式および油圧式で動作するブレーキ システムに関連しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 7642 was prepared by Technical Committee ISO/TC 22, Road vehicles.
This second edition cancels and replaces the first edition (ISO 7642:1983), of which certain values have been altered, the previous clause 8 deleted and references updated.
1 Scope
This International Standard specifies test methods for type approval testing of the overrun brakes on trailers. It should therefore be used in connection with the pertinent regulation. 1)
NOTES
- 1 In order to understand fully the requirements of this International Standard and to ensure that the test procedures are correctly applied, it is recommended that the regulation is studied before application of this International Standard.
- 2 Only SI units are used in this International Standard.These test methods apply to the type approval of categories O1 and O21) trailers with inertia brakes by testing on an inertia dynamometer. They relate to mechanically and hydraulically operated braking systems.