※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 7656 は、技術委員会 ISO/TC 22, 道路車両、小委員会 SC 6, 寸法と質量の用語と定義によって作成されました。
1 スコープ
この国際規格は、車両データの交換と電子処理に使用される商用道路車両の寸法コードを確立します。
ISO 3833 で定義されている商用車に適用されます。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 612:1978, 道路車両 - 自動車および牽引車両の寸法 - 用語と定義。
- ISO 1176:1990, 道路車両 - 大衆 - 語彙とコード。
- ISO 3409:1975, 乗用車 — フット コントロールの横方向の間隔。
- ISO 3832:1991, 乗用車 - 荷物コンパートメント - 基準容積の測定方法。
- ISO 3833:1977, 道路車両 — タイプ — 用語と定義。
- ISO 4130:1978, 道路車両 — 三次元参照システムおよび基準マーク — 定義。
- ISO 4131:1979, 道路車両 — 乗用車の寸法コード。
- ISO 6549:1980, 道路車両 — H 点決定の手順。
3 つの定義
この国際規格の目的のために、ISO 4130 および ISO 4131 で与えられた定義と次の定義が適用されます。
3.1
デイライトオープニング
特定の方向または投影に従って、ガラスに隣接するリビールまたはガーニッシュモールディングを含む、ガラス開口部を通る最大の遮るもののない開口部。指定がない場合、寸法は水平投影です。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 7656 was prepared by Technical Committee ISO/TC 22, Road vehicles, Sub-Committee SC 6, Terms and definitions of dimensions and masses.
1 Scope
This International Standard establishes dimensional codes for commercial road vehicles to be used for the exchange of vehicle data and electronic processing.
It applies to commercial road vehicles as defined in ISO 3833.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 612:1978, Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions.
- ISO 1176:1990, Road vehicles — Masses — Vocabulary and codes.
- ISO 3409:1975, Passenger cars — Lateral spacing of foot controls.
- ISO 3832:1991, Passenger cars — Luggage compartments — Method of measuring reference volume.
- ISO 3833:1977, Road vehicles — Types — Terms and definitions.
- ISO 4130:1978, Road vehicles — Three-dimensional reference system and fiducial marks — Definitions.
- ISO 4131:1979, Road vehicles — Dimensional codes for passenger cars.
- ISO 6549:1980, Road vehicles — Procedure for H-point determination.
3 Definitions
For the purposes of this International Standard, the definitions given in ISO 4130 and ISO 4131 and the following definition apply.
3.1
daylight opening
Maximum unobstructed opening through any glass aperture, including reveal or garnish-mouldings adjoining the glass, according to a given direction or projection. If not specified, the dimension is the horizontal projection.