この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が認可された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 7721 は ISO/TC 2ファスナー技術委員会によって開発され、1981 年 12 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ、フランス | ニュージーランド |
| オーストリア | ハンガリー | ノルウェー |
| ベルギー | インド | ポーランド |
| カナダ | アイルランド | ルーマニア |
| 中国 | イタリア | 南アフリカ共和国 |
| チェコスロバキア | 日本 | スペイン |
| デンマーク | 韓国、民主党議員 | スリランカ |
| エジプト、アラブ共和国 | 韓国 | スウェーデン |
| フィンランド | メキシコ | スイス |
| フランス | オランダ | アメリカ合衆国 |
次の国の加盟団体は、技術的な理由からこの文書に不承認を表明しました。
イギリス
1 適用範囲と適用分野
この国際規格は、すりわり付き皿ねじおよび穴付き皿ねじの頭部形状の特性を規定し、それぞれの製品規格に規定されている頭部寸法の測定方法を推奨しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 7721 was developed by Technical Committee ISO/TC 2, Fasteners, and was circulated to the member bodies in December 1981.
It has been approved by the member bodies of the following countries:
| Australia | Germany, F.R. | New Zealand |
| Austria | Hungary | Norway |
| Belgium | India | Poland |
| Canada | Ireland | Romania |
| China | Italy | South Africa, Rep. of |
| Czechoslovakia | Japan | Spain |
| Denmark | Korea, Dem. P. Rep. of | Sri Lanka |
| Egypt, Arab Rep. of | Korea, Rep. of | Sweden |
| Finland | Mexico | Switzerland |
| France | Netherlands | USA |
The member body of the following country expressed disapproval of the document on technical grounds:
United Kingdom
1 Scope and field of application
This International Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the respective product standards.