この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7728 は、ISO/TC 59建築建設技術委員会によって作成されました。
1 スコープ
この国際規格は、2 つのプレハブ式普通コンクリート外壁コンポーネントとコンクリート床の間の典型的な水平接合部の特性と特性を規定しています。 1)
しかし、建物の構造挙動に関わる接合部の特性はこの国際規格では規定されていません。
参考文献3件
- ISO 140/4, 音響 — 建物および建築要素の遮音性の測定 — Part 4: 部屋間の空気伝播遮音性の現場測定。
- ISO 717/1, 音響 — 建物および建物要素の遮音性の評価 — Part 1: 建物および内部の建物要素の空気伝播遮音。
- ISO 2444, 建物の接合部 — 語彙。
- ISO 2445, 建物の接合部 — 設計の基本原則。
- ISO 3447, 建物のジョイント — ジョイント機能の一般的なチェックリスト。
- ISO 6511, 建築構造 — モジュラー調整 — 垂直寸法のモジュラー床面。
- ISO 6589, 建物の接合部 — 接合部の通気性の試験方法。
- ISO 7729, 2つのプレハブ普通コンクリート外壁コンポーネント間の典型的な垂直接合部 - 特性、特性、および分類基準。
4 つの定義
この国際規格の目的のために、ISO 2444 で与えられた定義が以下とともに適用されます。
4.1
耐荷重外壁
外壁。建物の安定性においてその役割は、床荷重を全体または部分的に基礎に伝達することです。
4.2
自立型外壁
建物の全高にわたって自重に相当する荷重を基礎に伝える外壁ですが、床は支えません。
4.3
サポートされている外壁
外壁。その重量は床ごとに建物の耐荷重構造に伝わります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7728 was prepared by Technical Committee ISO/TC 59, Building construction.
1 Scope
This International Standard specifies the properties and characteristics of typical horizontal joints between two prefabricated ordinary concrete external wall components and a concrete floor. 1)
However, the characteristics of joints which are involved in the structural behaviour of buildings are not specified in this International Standard.
3 References
- ISO 140/4, Acoustics — Measurement of sound insulation in buildings and of building elements — Part 4: Field measurements of airborne sound insulation between rooms.
- ISO 717/1, Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation in buildings and of interior building elements.
- ISO 2444, Joints in building — Vocabulary.
- ISO 2445, Joints in building — Fundamental principles for design.
- ISO 3447, Joints in building — General check-list of joint functions.
- ISO 6511, Building construction — Modular coordination — Modular floor plane for vertical dimensions.
- ISO 6589, Joints in building — Method of test for airpermeability of joints.
- ISO 7729, Typical vertical joints between two prefabricated ordinary concrete external wall components — Properties, characteristics and classification criteria.
4 Definitions
For the purposes of this International Standard, the definitions given in ISO 2444, together with the following, apply.
4.1
loadbearing external wall
External wall, the role of which in the stability of the building is to transmit wholly or partly the floor loads to the foundations.
4.2
selfsupporting external wall
External wall, which transmits to the foundations the loads corresponding to its own weight over the whole height of the building but does not support the floors.
4.3
supported external wall
External wall, the weight of which is transmitted floor by floor to the loadbearing structure of the building.