※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2. www.iso.org/directives
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受け取った特許宣言の ISO リストに記載されます。 www.iso.org/patents
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
この文書を担当する委員会は、ISO/TC 29, 小型工具、小委員会 SC 9, 硬質切削材料で作られた刃先を持つ工具です。
この第 2 版は、第 1 版 (ISO 7755-6:1984) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。
ISO 7755 は、次の部分で構成されており、一般的なタイトルはHardmetal burrsです。
- Part 1: 一般仕様
- Part 2: 円筒バリ (スタイル A)
- Part 3: 円筒形のラウンド (ボール) ノーズ バー (スタイル C)
- Part 4: 球状バリ (スタイル D)
- Part 5: オーバル バリ (スタイル E)
- Part 6: アーチ ラウンド (ボール) ノーズ バー (スタイル F)
- Part 7: アーチ ポインテッド ノーズ バー (スタイル G)
- Part 8: フレーム バリ (スタイル H)
- Part 9: 60° および 90° のコーン バー (スタイル J および K)
- Part 10: コニカル ラウンド (ボール) ノーズ バー (スタイル L)
- Part 11: 円錐形の先のとがったバー (スタイル M)
- Part 12: 逆円錐バリ (スタイル N)
1 スコープ
ISO 7755 のこの部分は、丸い (ボール) ノーズを持ち、記号 F で指定された、アーチ形状の超硬合金バリの切削部分の主な寸法を指定します。
切断直径、ねじれの方向、円筒シャンクの切断直径と長さ、およびバリの指定に関する公差は、ISO 7755-1 で扱われています。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 7755-1, 超硬バリ — 1: 一般仕様
参考文献
| [1] | ISO 1339, 切削工具データの表示と交換 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
The committee responsible for this document is ISO/TC 29, Small tools, Subcommittee SC 9, Tools with cutting edges made of hard cutting materials.
This second edition cancels and replaces the first edition (ISO 7755-6:1984), of which it constitutes a minor revision.
ISO 7755 consists of the following parts, under the general title Hardmetal burrs:
- Part 1: General specifications
- Part 2: Cylindrical burrs (style A)
- Part 3: Cylindrical round- (ball-) nose burrs (style C)
- Part 4: Spherical burrs (style D)
- Part 5: Oval burrs (style E)
- Part 6: Arch round- (ball-) nose burrs (style F)
- Part 7: Arch pointed-nose burrs (style G)
- Part 8: Flame burrs (style H)
- Part 9: 60° and 90° cone burrs (styles J and K)
- Part 10: Conical round- (ball-) nose burrs (style L)
- Part 11: Conical pointed-nose burrs (style M)
- Part 12: Inverted cone burrs (style N)
1 Scope
This part of ISO 7755 specifies the main dimensions of the cutting part for hardmetal burrs of arch shape, with a round- (ball-) nose and designated by the symbol F.
Tolerances on the cutting diameter, direction of helix and cut, diameter and length of the cylindrical shank and designation of burrs are dealt with in ISO 7755-1.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 7755-1, Hardmetal burrs — 1: General specifications
Bibliography
| [1] | ISO 13399 (all parts), Cutting tool data representation and exchange |