この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が承認された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 7801 は、技術委員会 ISO/TC 164, 金属の機械的試験によって開発され、1983 年 1 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ、フランス | ポーランド |
| オーストリア | ハンガリー | ルーマニア |
| ブルガリア | イタリア | 南アフリカ共和国 |
| カナダ | 日本 | スペイン |
| スウェーデン | 中国 | 韓国、民主党 |
| チェコスロバキア | メキシコ | スイス |
| デンマーク | オランダ | アメリカ |
| ソビエト連邦 | フランス | ノルウェー |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました:
イギリス
この国際規格 ISO 7801 は、国際規格 ISO 144-1973 および ISO 2625-1973 を廃止し、置き換えます。この国際規格は、技術的な改訂版を構成しています。
1 適用範囲と適用分野
この国際規格は、直径または厚さが 0.3 mm から 10 mm までの金属ワイヤが逆曲げ中に塑性変形を受ける能力を決定する方法を規定しています。この国際規格が適用される直径または厚さの範囲は、関連する製品規格でより正確に指定される場合があります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 7801 was developed by Technical Committee ISO/TC 164, Mechanical testing of metals, and was circulated to the member bodies in January 1983.
It has been approved by the member bodies of the following countries:
| Australia | Germany, F.R. | Poland |
| Austria | Hungary | Romania |
| Bulgaria | Italy | South Africa, Rep. of |
| Canada | Japan | Spain |
| Sweden | China | Korea, Dem. P. Rep. of |
| Czechoslovakia | Mexico | Switzerland |
| Denmark | Netherlands | USA |
| USSR | France | Norway |
The member body of the following country had expressed disapproval of the document on technical grounds:
United Kingdom
This International Standard ISO 7801 cancels and replaces the International Standards ISO 144-1973 and ISO 2625-1973 of which it constitutes a technical revision.
1 Scope and field of application
This International Standard specifies the method for determining the ability of metallic wire of diameter or thickness 0,3 to 10 mm inclusive to undergo plastic deformation during reverse bending. The range of diameters or thicknesses for which this International Standard is applicable may be more exactly specified in the relevant product standard.