この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が承認された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 7806 は、技術委員会 ISO/TC 24 、ふるい、ふるい分けおよびその他のサイジング方法によって開発され、1982 年 11 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | インド | 南アフリカ共和国 |
| ベルギー | イタリア | スペイン |
| カナダ | 日本 | スイス |
| エジプト、アラブ共和国 | 韓国、民主党 | イギリス |
| フランス | オランダ | ソビエト連邦 |
| ドイツ、フランス | ルーマニア |
この文書の不承認を表明した加盟団体はありませんでした。
0 はじめに
この国際規格に定められたシステムは、購入者と供給者の間のコミュニケーションを容易にするために、多孔板の指定を体系化しています。これは、1968 年にヨーロッパの有孔プレート製造業者協会 (EUROPERF) によって実施された作業に基づいています。多様な国内コードの開発と使用を思いとどまらせるために、このシステムを世界中に適用することが推奨されます。
1 適用範囲と適用分野
この国際規格は、多孔板における各種のミシン目とそれらの配置を指定するためのコードを規定しています。板材を問わず、有孔板に適用されます。
2 参照
- ISO 2395, 試験ふるいと試験ふるい - 語彙。
3 つの定義
この国際規格の目的のために、ISO 2395 で与えられた定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 7806 was developed by Technical Committee ISO/TC 24, Sieves, sieving and other sizing methods, and was circulated to the member bodies in November 1982.
It has been approved by the member bodies of the following countries:
| Australia | India | South Africa, Rep. of |
| Belgium | Italy | Spain |
| Canada | Japan | Switzerland |
| Egypt, Arab Rep. of | Korea, Dem. P. Rep. of | United Kingdom |
| France | Netherlands | USSR |
| Germany, F. R. | Romania |
No member body expressed disapproval of the document.
0 Introduction
The system laid down in this International Standard codifies the designation of perforated plate in order to facilitate communication between purchaser and supplier. It is based on work carried out in 1968 by the European association of manufacturers of perforated plate (EUROPERF). It is recommended that this system be applied worldwide, in order to discourage the development and use of a diversity of national codes.
1 Scope and field of application
This International Standard specifies the code for designating various kinds of perforations and their arrangements in perforated plate. It applies to perforated plate regardless of the plate material.
2 Reference
- ISO 2395, Test sieves and test sieving — Vocabulary.
3 Definitions
For the purpose of this International Standard, the definitions given in ISO 2395 apply.