※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が承認された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 7852 は、技術委員会 ISO/TC 127 土工機械によって開発され、1982 年 12 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | エジプト、アラブ共和国 | スウェーデン |
| オーストリア | イタリア | イギリス |
| ベルギー | 日本 | アメリカ |
| ブラジル | メキシコ | ソビエト連邦 |
| ブルガリア | ポーランド | |
| チェコスロバキア | ルーマニア |
この文書の不承認を表明した加盟団体はありませんでした。
1 適用範囲と適用分野
この国際規格は、ISO 6165 で定義されているように、土工機械のカッティング エッジ、エンド ビット、バケット歯などの取り付けに使用されるプラウ ボルトのヘッドの形状と寸法 (ねじの寸法を除く) を規定しています。互換性。
2 参考文献
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 7852 was developed by Technical Committee ISO/TC 127, Earth-moving machinery, and was circulated to the member bodies in December 1982.
It has been approved by the member bodies of the following countries:
| Australia | Egypt, Arab Rep. of | Sweden |
| Austria | Italy | United Kingdom |
| Belgium | Japan | USA |
| Brazil | Mexico | USSR |
| Bulgaria | Poland | |
| Czechoslovakia | Romania |
No member body expressed disapproval of the document.
1 Scope and field of application
This International Standard specifies the shapes and lays down the dimensions of the heads of plough bolts (excluding thread dimensions) used for mounting of cutting edges, end bits, bucket teeth etc. of earth-moving machinery as defined in ISO 6165 taking into consideration the interchangeability.
2 References
- ISO 6165, Earth-moving machinery — Basic types — Vocabulary.
- ISO 7129, Earth-moving machinery — Tractors with dozer, graders, tractor scrapers — Cutting edges — Principal shapes and basic dimensions.