※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の資料を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、ISO/TC 23 技術委員会、農業および林業用トラクターおよび機械、小委員会 SC 2, 共通テストによって作成されました。
この第 4 版は、OECD コード 2: 2017 年 2 月との技術的調和のために技術的に改訂された第 3 版 (ISO 789‑2:1993) を廃止し、置き換えるものです。
ISO 789 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、後部に取り付けられた 3 点リンク システムの吊り上げ能力を決定するための試験手順を指定します。
- a)動作範囲全体にわたって、下部ヒッチ ポイントで油圧リフトによって及ぼすことができる最大垂直力。
- b) 3 点リンケージに取り付けられたフレーム上のヒッチ ポイントの後方 610 mm の点で、油圧リフトによってその全可動範囲にわたって発揮できる最大垂直力。
注 1静的テストにより、トラクター間の適切な比較が可能になります。テスト結果は、トラクターを比較する手段としてのみ使用され、トラクターで運ぶことができる作業のサイズを推奨する方法としては使用されません。
注 2この試験手順は、フロントマウント 3 点ヒッチ システムの吊り上げ能力を決定するために使用できます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 730:2009, 農業用車輪付きトラクター — 後部取り付け 3 点リンケージ — カテゴリ 1N, 1, 2N, 2, 3N, 3, 4N および 4
- ISO 730:2009/Amd 1:2014, 農業用車輪付きトラクター — 後部取り付け 3 点リンケージ — カテゴリ 1N, 1, 2N, 2, 3N, 3, 4N および 4 — 修正 1
- ISO 789-13:2018, 農業用トラクター — 試験手順 — Part 13: 語彙および試験片試験報告書
- ISO 3448:1992, 工業用液体潤滑剤 - ISO 粘度分類
3 用語と定義
この文書の目的のために、ISO 789‑13 で与えられる用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1] | OECD コード 2: 2017 年 2 月。農林業用トラクターの性能の公式試験に関する OECD 標準コード |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 2, Common tests.
This fourth edition cancels and replaces the third edition (ISO 789‑2:1993), which has been technically revised for the technical harmonization with OECD Code 2: February 2017.
A list of all the parts in the ISO 789 series can be found on the ISO website.
1 Scope
This document specifies test procedures for determining the lifting capacity of rear-mounted three-point linkage systems:
- a) the maximum vertical force which can be exerted by the hydraulic lift at the lower hitch points throughout their full range of movement;
- b) the maximum vertical force which can be exerted by the hydraulic lift, at a point 610 mm to the rear of the hitch points on a frame attached to the three-point linkage, throughout its full range of movement.
NOTE 1 A static test provides an adequate comparison between tractors. The test results are used only as a means of comparing tractors and not as a way of recommending the size of an implement which can be carried by the tractor.
NOTE 2 This test procedure can be used to determine the lifting capacity of front-mounted three-point hitch systems.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 730:2009, Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
- ISO 730:2009/Amd 1:2014, Agricultural wheeled tractors — Rear mounted three-point linkage – Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 — Amendment 1
- ISO 789-13:2018, Agricultural tractors — Test procedures — Part 13: Vocabulary and specimen test report
- ISO 3448:1992, Industrial liquid lubricants — ISO viscosity classification
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 789‑13 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1] | OECD Code 2: February 2017. OECD Standard Code for the official testing of agricultural and forestry tractor performance |