※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持を意図した手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 123, すべり軸受、小委員会 SC 2, 材料および潤滑剤、それらの特性、特性、試験方法および試験条件によって作成されました。
この第 2 版は、マイナー リビジョンを構成する第 1 版 (ISO 7905-3:1995) を取り消して置き換えます。前作からの変更点は以下の通り。
- ISO/IEC指令への調整、 2:2018;
- 参考文献の更新。
ISO 7905 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
この文書は、多層軸受材料のプレーン ストリップの疲労における耐久限度を決定する方法を指定します。さらに、油圧と可変温度のストリップへの影響を調べる機会を提供します。
2 参考文献
このドキュメントには規範的な参照はありません。
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 3548-1, すべり軸受 — フランジ付きまたはフランジなしの薄肉半割軸受 — 1: 公差、設計上の特徴、および試験方法 |
| [2] | ISO 4378-1, すべり軸受 — 用語、定義、分類および記号 — 1: 設計、軸受材料とその特性 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 123, Plain bearing, Subcommittee SC 2, Material and lubricants, their properties, characteristics, test methods and testing conditions.
This second edition cancels and replaces the first edition (ISO 7905-3:1995), of which it constitutes a minor revision. The changes compared to the previous edition are as follows:
- Adjustment to ISO/IEC Directives, 2:2018;
- Update of Bibliography.
A list of all parts in the ISO 7905 series can be found on the ISO website.
1 Scope
This document specifies a method for the determination of the endurance limit in fatigue of plain strips of multilayer bearing materials. Additionally, it provides the opportunity of studying the influence on the strips of hydraulic pressure and variable temperature.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 3548-1, Plain bearings — Thin-walled half bearings with or without flange — 1: Tolerances, design features and methods of test |
| [2] | ISO 4378-1, Plain bearings — Terms, definitions, classification and symbols — 1: Design, bearing materials and their properties |