※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 8016 は、技術委員会 ISO/TC 23, 農業および林業用のトラクターおよび機械によって作成されました。
1 適用範囲と適用分野
この国際規格は、農業機械用の一体型ハブを備えた一連の作業用ホイールと、そのようなホイールを農業機械に取り付けるために必要な寸法を規定しています。
この国際規格は、農業機械用の一体型ハブを備えたホイールの実装に適用されます。
この国際規格には補助輪は含まれていません。
2 つの定義
2.1
ホイールを実装する
おそらくトラクターの深さ制御に関連して、地面から測定された農具の作業高さを制御するように設計されたホイール。
2.2
サポートホイール
分離された農機具または農機具の一部を支持するように設計された車輪で、使用時にトラクターによって運ばれます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 8016 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry.
1 Scope and field of application
This International Standard specifies a series of implement wheels with integral hubs for agricultural machines, and the dimensions which are necessary for the attachment of such wheels to agricultural machines.
This International Standard applies to implement wheels with integral hubs for agricultural machines.
Supporting wheels are not included in this International Standard.
2 Definitions
2.1
implement wheels
Wheels which are designed to control the working height of an agricultural implement, measured from the ground surface, possibly in connection with the depth control of the tractor.
2.2
supporting wheels
Wheels which are designed to support disconnected agricultural implements or part of such implements, which are carried by the tractor when in use.