※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 8064 は、技術委員会 ISO/TC 97, 情報処理システムによって作成されました。
1 適用範囲と適用分野
この国際規格は、12.7 mm (0.5 インチ) 幅の磁気テープ用の 3 つのサイズのリールの特性を指定して、そのようなリールの物理的な互換性を可能にします。サイズは
サイズ 16
サイズ 18
サイズ 22
それらの寸法は、フランジの全体的な直径のみが異なります。この国際規格の他のすべての要件は、3 つのサイズすべてに等しく適用されます。すべての要件は、完全なリールを参照する 8.2 を除いて、空のリールを参照します。
この国際規格で指定されたリールは、ISO 1864 で指定されたより大きなリール (サイズ 27) が使用されない用途を対象としています。
この国際規格に準拠したリールは、ISO 6098 で指定されたセルフローディング カートリッジには使用できません。
注 -この国際規格の SI および/またはインペリアル測定システムの数値は四捨五入されている可能性があるため、互いに一致していますが、正確に等しいわけではありません。どちらのシステムも使用できますが、2 つを混合したり、再変換したりしないでください。元のデザインは、帝国測定システムを使用して作成されました。
2 参考文献
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 8064 was prepared by Technical Committee ISO/TC 97, Information processing systems.
1 Scope and field of application
This International Standard specifies the characteristics of three sizes of reels for 12,7 mm (0.5 in) wide magnetic tape to allow physical interchangeability of such reels. The sizes are
size 16
size 18
size 22
Their dimensions differ only in the overall diameter of their flanges. All other requirements of this International Standard apply equally to all three sizes. All requirements refer to empty reels, except for 8.2 which refers to full reels.
Reels specified in this International Standard are intended for applications where the larger reel (size 27) specified in ISO 1864 is not used.
Reels complying with this International Standard cannot be used with the self-loading cartridge specified in ISO 6098.
NOTE — Numeric values in the SI and/or Imperial measurement system in this International Standard may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor reconverted. The original design was made using the Imperial measurement system.
2 References
- ISO 1864, Information processing — Unrecorded 12,7 mm (0.5 in) wide magnetic tape for information interchange — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1.
- ISO 6098, Information processing — Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape.