※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令第 2 Part に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
この第 2 版は、技術的に改訂された第 1 版 (ISO 8121:1986) を廃止し、置き換えます。また、技術的正誤表 ISO 8121:1986/Cor も組み込まれています。 1:199
1 スコープ
この国際規格は、繊維産業で使用される編み機の銘板に関する最小限の情報を規定しています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 8117, 繊維機械 - 編機 - 円形機械の呼び径
- ISO 8122, 繊維機械 - 編機 - 呼び径の大きい丸編機の針数
- ISO 8188, 繊維機械および付属品 - 編機のピッチ
- ISO 8640-1, 繊維機械および付属品 — 横経編機 — Part 1: 基本構造および編み要素の語彙
- ISO 11675, 繊維機械および付属品 — 横編機 — 語彙
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
This second edition cancels and replaces the first edition (ISO 8121:1986), which has been technically revised. It also incorporates the Technical Corrigendum ISO 8121:1986/Cor. 1:1992.
1 Scope
This International Standard specifies the minimum information for the nameplates on knitting machines used in the textile industry.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 8117, Textile machinery — Knitting machines — Nominal diameters of circular machines
- ISO 8122, Textile machinery — Knitting machines — Number of needles for circular knitting machines of large nominal diameter
- ISO 8188, Textile machinery and accessories — Pitches of knitting machines
- ISO 8640-1, Textile machinery and accessories — Flat warp knitting machines — Part 1: Vocabulary of basic structure and knitting elements
- ISO 11675, Textile machinery and accessories — Flatbed knitting machines — Vocabulary