※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を 参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 2, 試験および分析によって作成されました。
この第 6 版は、第 5 版 (ISO 813:2016) を取り消し、置き換えるものであり、付録 B の表 B.1 のタイプミスを修正するためのマイナー改訂となります。
警告 1この文書を使用する人は、通常の実験室での実践に精通している必要があります。この文書は、その使用に関連する安全上の問題がある場合、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、その他の制限の適用性を判断するのはユーザーの責任です。
警告 2この文書で指定されている特定の手順には、局所的な環境危険を引き起こす可能性のある物質の使用または生成、または廃棄物の生成が含まれる場合があります。使用後の安全な取り扱いと廃棄については、適切な文書を参照する必要があります。
1 スコープ
この文書は、単一の硬質材料プレートに接着されたゴムのストリップからなる試験片を使用して、硬質基材に接着された加硫ゴムまたは熱可塑性ゴムの接着強度を測定するための方法を規定している。試験は90°の剥離角度で実施されます。
この方法は主に、標準条件下で実験室で作成された試験片に適用でき、ゴム配合物や接着剤システムの選択、そのような材料の開発、製造プロセスの制御のためのデータを提供するために使用できます。
この方法は、通常 85 IRHD を超える高硬度のゴムには適していません。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 5893, ゴムおよびプラスチック試験装置 — 引張、曲げおよび圧縮タイプ (一定速度の移動) — 仕様
- ISO 18899:2013, ゴム — 試験装置の校正ガイド
- ISO 23529, ゴム — 物理試験法用の試験片を準備および調整するための一般手順
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 11346, ゴム、加硫または熱可塑性プラスチック — 寿命と使用最高温度の推定 |
| 2 | Williams ML, Landel RF, Ferry JD, 非晶質ポリマーおよびその他のガラス形成液体における緩和機構の温度依存性。ジャム。化学学会。 1995年、77ページ。 3701 |
| 3 | Ferry JD, 「ポリマーの粘弾性特性における温度および圧力に対する粘弾性挙動の依存性」、J. Wiley, ニューヨーク、第 3 版、1980 年、264 ページ |
| 4 | Aklonis JJ, MacKnight WJ, 「ポリマー粘弾性入門」の時間と温度の対応、J. Wiley, ニューヨーク、第 2 版、1983 年、46 ページ |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis.
This sixth edition cancels and replaces the fifth edition (ISO 813:2016), of which it constitutes a minor revision to correct a typo in Table B.1 in Annex B.
WARNING 1 Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine the applicability of any other restrictions.
WARNING 2 Certain procedures specified in this document might involve the use or generation of substances, or the generation of waste, that could constitute a local environmental hazard. Reference should be made to appropriate documentation on safe handling and disposal after use.
1 Scope
This document specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90°.
The method is applicable primarily to test pieces prepared in the laboratory under standard conditions, such as can be used to provide data for the choice of rubber compounds or adhesive systems, the development of such materials and the control of manufacturing processes.
This method is not suitable for high-hardness rubbers, typically above 85 IRHD.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5893, Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
- ISO 18899:2013, Rubber — Guide to the calibration of test equipment
- ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 11346, Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use |
| 2 | Williams M.L., Landel R.F., Ferry J.D., The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. J. Am. Chem. Soc. 1995, 77 p. 3701 |
| 3 | Ferry J.D., Dependence of viscoelastic behaviour on temperature and pressure in Viscoelastic Properties of Polymers, J. Wiley, New York, Third Edition, 1980, pp. 264 |
| 4 | Aklonis J.J., MacKnight W.J., Time-temperature correspondance in Introduction to Polymer Viscoelasticity, J. Wiley, New York, Second Edition, 1983, pp. 46 |