この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 8152 は、技術委員会 ISO/TC 127, 土工機械によって作成されました。
0 はじめに
この国際規格は、整備士の訓練のガイドとして意図されています。トレーニングの対象者は、ワークショップの実践とツールの使用に適切な偏見を持つ十分に健全な一般教育を受けており、トレーニングの恩恵を受けるのに十分に成熟していると想定されています。
潜在的な訓練生を選択する際には、能力だけでなく、肉体的および精神的なタフネスも考慮に入れる必要があります。なぜなら、機械のメンテナンスは困難で熟練した作業であり、特に劣悪な現場条件で実施される場合、高度な技術が必要になる可能性があるためです。医療フィットネス。
1 適用範囲と適用分野
この国際規格は、土工機械に適した機械工の訓練について説明しています。これらの要因は通常、地方および国の慣行および規制によってカバーされているため、習熟度または能力を評価するための手順は指定されていません。
この国際規格は、該当する国内規制または規格に優先するものではありません。
これは、ISO 6165 で定義されているすべての土工機械に適用されます。
2 参考文献
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 8152 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery.
0 Introduction
This International Standard is intended as a guide to the training of mechanics. It has been assumed that candidates for training possess a sufficiently sound general education with suitable bias towards workshop practice and the use of tools, and that they are sufficiently mature to benefit from the training.
In selecting potential trainees account needs to be taken not only of ability, but also of physical and mental toughness, since the maintenance of machinery is arduous and skilful work, which, particularly when carried out in poor site conditions, can require a high degree of medical fitness.
1 Scope and field of application
This International Standard describes the training of mechanics appropriate for earth-moving machinery. It does not specify any procedure for assessing proficiency or competence, since these factors are usually covered by local and national practices and regulations.
This International Standard is not intended to override any applicable national regulations or standards.
It applies to all earth-moving machinery as defined in ISO 6165.
2 References
- ISO 4510, Earth-moving machinery — Maintenance and adjustment tools.
- ISO 6012, Earth-moving machinery — Service instrumentation.
- ISO 6165, Earth-moving machinery — Basic types — Vocabulary.
- ISO 6750, Earth-moving machinery — Operation and maintenance — Format and content of manuals.