※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持を意図した手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質に関する説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 5, 鉄金属パイプおよび金属製付属品、小委員会 SC 2, 鋳鉄製パイプ、付属品およびそれらのジョイントによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 8179-2:1995) を取り消して置き換えるものです。次の変更が行われました。
- 亜鉛の最小量が 130 g/m 2から 200 g/m 2に増加しました。
- この改訂では、ダクタイル鉄パイプラインの寿命と信頼性を向上させ、さまざまなタイプの腐食 (一般的および局部的を含む) に対する保護を改善し、新しい合金強化剤を使用するための、亜鉛ベースのコーティングに関する分野の技術的進歩が認識されています。
ISO 8179 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
この文書は、ISO 2531, ISO 7186, および ISO 16631 で指定されているように、工場でダクタイル鉄パイプライン コンポーネントに適用される外部保護コーティング システムを指定します。ジンクリッチペイントコーティングと互換性のある合成樹脂。
注記ISO 8179-1 は、金属亜鉛ベースのコーティングに対応しています。
2 参考文献
このドキュメントには規範的な参照はありません。
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 2531, ダクタイル鉄管、付属品、付属品、および水用途のジョイント |
| [2] | ISO 7186, 縫製用途のダクタイル鋳鉄製品 |
| [3] | ISO 8179-1, ダクタイル鋳鉄管、継手、付属品およびバルブ — 外部亜鉛ベース コーティング — 1: 仕上げ層を備えた金属亜鉛ベースのコーティング |
| [4] | ISO 16631, プラスチック (PVC または PE) 配管システムと互換性のあるダクタイル鉄パイプ、継手、付属品、およびそれらのジョイント、水道用途およびプラスチック パイプライン接続、修理および交換用 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 5, Ferrous metal pipes and metallic fittings, Subcommittee SC 2, Cast iron pipes, fittings and their joints.
This second edition cancels and replaces the first edition (ISO 8179-2:1995), which has been technically revised. The following changes have been made:
- the minimum quantity of Zn has been increased from 130 g/m2 to 200 g/m2;
- the revision recognizes the technological advancements in the field regarding zinc-based coatings to increase the lifetime and reliability of ductile iron pipelines, improving protection to different types of corrosion (including general and localized) and the use of new alloy enrichments.
A list of all parts in the ISO 8179 series can be found on the ISO website.
1 Scope
This document specifies an external protective coating system which is factory-applied to ductile iron pipeline components as specified in ISO 2531, ISO 7186 and ISO 16631. This coating system comprises a zinc-rich paint followed by a finishing layer that can be bituminous paint or synthetic resin compatible with zinc rich paint coating.
NOTE ISO 8179-1 addresses metallic zinc-based coatings.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 2531, Ductile iron pipes, fittings, accessories and their joints for water applications |
| [2] | ISO 7186, Ductile iron products for sewerage applications |
| [3] | ISO 8179-1, Ductile iron pipes, fittings, accessories and valves — External zinc-based coatings — 1: Metallic zinc-based coatings with finishing layer |
| [4] | ISO 16631, Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement |