※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 3 部に規定されている規則に従って草案されています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
ISO 8216 のこの部分の要素の一部が特許権の対象となる可能性が注目されています。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO 8216-99 は、技術委員会 ISO/TC 28, 石油製品および潤滑剤、小委員会 SC 4, 分類および仕様によって作成されました。
この第 1 版は、技術的に改訂された ISO 8216-0:1986 を取り消し、置き換えます。
ISO 8216 は、一般タイトル「石油製品 - 燃料 (クラス F) - 分類6」の下にある次の部分で構成されています。
- Part 1: 船舶用燃料のカテゴリー
- Part 2: 産業用および船舶用のガスタービン燃料のカテゴリー
- Part 3: ファミリー L (液化石油ガス)
- Part 99: 一般
1 スコープ
ISO 8216 のこの部分は、接頭辞文字「F」で指定される石油燃料に適用される一般的な分類システムを確立しています。
クラス F 内では、燃料の種類に応じて 5 つの製品ファミリー (カテゴリーとして指定) が定義され、揮発性の降順にリストされています。 1 つのカテゴリー D は、世界のさまざまな地域でそのような燃料に対するさまざまな慣例的名称が安全性への影響を与えるため、揮発性と引火点に基づいてサブグループによってさらに定義されます。サブグループ L (軽質留分) は、密閉カップ引火点が通常の周囲温度より低い揮発性の高い液体燃料であるため、サブグループ M および H には必要のない特別な危険予防措置が必要になる場合があります。
用途、タイプ、特性に応じた補完的な要素を考慮したファミリーの詳細な分類は、各カテゴリの特定の製品を定義し、必要に応じて ISO 8216 の関連部分に示されます。
注 1石油燃料は、これらの燃料またはその成分が調製前に他の目的に使用されていない場合にのみ、ISO 8216 のこの部分の要件を満たします。
注 2燃料のクラス F は、ISO 8681 に規定されている石油製品の分類方法の一部として定義されています。
2 基準参照
以下の規範文書には、本文中の参照を通じて ISO 8216 のこの部分の規定を構成する規定が含まれています。日付が記載された参照については、この出版物のその後の修正または改訂は適用されません。ただし、ISO 8216 のこの部分に基づく契約の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することが推奨されます。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 8681:1986, 石油製品および潤滑油 — 分類方法 — クラスの定義
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 8216 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 8216-99 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants, Subcommittee SC 4, Classifications and specifications.
This first edition cancels and replaces ISO 8216-0:1986, which has been technically revised.
ISO 8216 consists of the following parts, under the general title Petroleum products — Fuels (class F) — Classification6:
- Part 1: Categories of marine fuels
- Part 2: Categories of gas turbine fuels for industrial and marine applications
- Part 3: Family L (Liquefied petroleum gases)
- Part 99: General
1 Scope
This part of ISO 8216 establishes a general system of classification which applies to petroleum fuels designated by the prefix letter “F”.
Within class F, five families (designated as categories) of products are defined according to the type of fuel and listed in decreasing order of volatility. One category, D, is defined further by subgroups on the basis of volatility and flash point, because of the safety implications of different customary titles for such fuels in different parts of the world. Subgroup L (light distillate) is a highly volatile liquid fuel with a closed-cup flash point below normal ambient temperature, and thus may require special hazard precautions not necessary for subgroups M and H.
The detailed classification of a family, taking into account complementary elements according to the uses, type and properties, define particular products in each category, and are given in relevant parts of ISO 8216 as the need arises.
NOTE 1 Petroleum fuels only meet the requirement of this part of ISO 8216 if these fuels, or their components, have not been used for any other purposes prior to their preparation.
NOTE 2 Class F for fuels has been defined as part of the method of classification for petroleum products given in ISO 8681.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of this part of ISO 8216. For dated references, subsequent amendments to, or revisions of, this publication do not apply. However, parties to agreements based on this part of ISO 8216 are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 8681:1986, Petroleum products and lubricants — Method of classification — Definition of classes