※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 8263 は、技術委員会 ISO/TC 102, 鉄鉱石、サブ委員会 SC 3, 物理試験によって作成されました。
付属書 A は、この国際規格の不可欠な部分を形成します。
序章
焼結試験は、特定の鉄鉱石微粉の焼結挙動の評価、焼結工場での生産および品質管理の目的、あるいは焼結プロセスや焼結技術に関する研究目的など、いくつかの異なる目的で実施できます。
これらの焼結試験の結果から、鉄鉱石または鉄鉱石混合物の焼結挙動は、生産速度、燃料消費率、および焼結品質の観点から決定されます。この国際規格の目的は、特定の鉄鉱石微粉を評価したwhere など、別の当事者間で焼結試験データを交換する必要がある場合に使用するために、これらの結果を表示するための用語と方法を確立することです。商業的な理由、または研究や制作の結果が出版されるwhere
1 スコープ
この国際規格は、焼結試験の結果を表示する方法を規定しています。焼結プロセスによって凝集したすべての鉄鉱石微粉に適用できます。
付録A
関連する試験方法を規定した国際規格
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
| 1 | ISO 562:1981, 硬炭およびコークス - 揮発性物質含有量の測定。 |
| 2 | ISO 625:1975, 石炭とコークス - 炭素と水素の測定 - リービッヒ法。 |
| 3 | ISO 1171:1981, 固体鉱物燃料 - 灰の測定。 |
| 4 | ISO 2597:1985, 鉄鉱石 - 総鉄含有量の測定 - 滴定法。 |
| 5 | ISO 2598:1980, 鉄鉱石 - シリコン含有量の測定 - 重量法。 |
| 6 | ISO 2599:1983, 鉄鉱石 - リン含有量の測定 - 滴定法。 |
| 7 | ISO 3087:1987, 鉄鉱石 - 積荷の水分含有量の測定。 |
| 8 | ISO 3271:1985, 鉄鉱石 - タンブラー強度の測定。 |
| 9 | ISO 3852:1988, 鉄鉱石 - かさ密度の測定。 |
| 10 | ISO 3886:1986, 鉄鉱石 - マンガン含有量の測定 - 過ヨウ素酸分光光度法。 |
| 11 | ISO 4686:1980, 鉄鉱石 - ケイ素含有量の測定 - 還元モリブドケイ酸塩分光光度法。 |
| 12 | ISO 4687:1984, 鉄鉱石 - リン含有量の測定 - モリブデンブルー分光光度法。 |
| 13 | ISO 4688:1980, 鉄鉱石 - アルミニウム含有量の測定 - フレーム原子吸光分析法。 |
| 14 | ISO 4689:1986, 鉄鉱石 - 硫黄含有量の測定 - 硫酸バリウム重量法 (改訂時には ISO 4689-1 を参照) |
| 15 | ISO 4690:1986, 鉄鉱石 - 硫黄含有量の測定 - 燃焼方法 (改訂時には ISO 4689-2 が参照されます) |
| 16 | ISO 4695:1984, 鉄鉱石 - 還元性の測定。 |
| 17 | ISO 4696:1984, 鉄鉱石 - 低温崩壊試験 - 静電気除去後の冷間タンブリングを使用する方法。 |
| 18 | ISO 4701:1985, 鉄鉱石 - ふるいによるサイズ分布の決定。 |
| 19 | ISO 6830:1986, 鉄鉱石 - アルミニウム含有量の測定 - EDTA 滴定法。 |
| 20 | ISO 6831:1986, 鉄鉱石 - ナトリウムおよび/またはカリウム含有量の測定 - フレーム原子吸光分析法。 |
| 21 | ISO 7215:1985, 鉄鉱石 - 相対還元性の測定。 |
| 22 | ISO 7335:1987, 鉄鉱石 - 結合水分含有量の測定 - カールフィッシャー滴定法。 |
| 23 | ISO 9035:1989, 鉄鉱石 - 酸可溶性鉄(II)含有量の測定 - 滴定法。 |
| 24 | ISO 9507:1990, 鉄鉱石 - 総鉄含有量の決定 - 塩化チタン(III) の還元方法。 |
| 25 | ISO 9508:1990, 鉄鉱石 - 総鉄含有量の測定 - 銀還元滴定法。 |
| 26 | ISO 10203:1992, 鉄鉱石 - カルシウム含有量の測定 - フレーム原子吸光分析法。 |
| 27 | ISO 10204:1992, 鉄鉱石 - マグネシウム含有量の測定 - フレーム原子吸光分析法。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 8263 was prepared by Technical Committee ISO/TC 102, Iron ores, Sub-Committee SC 3, Physical testing.
Annex A forms an integral part of this International Standard.
Introduction
Sintering tests can be conducted for several different purposes, for example, the assessment of the sintering behaviour of a particular iron ore fines, for production and quality control purposes at a sinter plant, or for research purposes concerned with the sintering process or sintering technology.
From the results of these sintering tests, the sintering behaviour of an iron ore, or iron ore mix, is determined in terms of production rate, fuel consumption rate and sinter quality. The purpose of this International Standard is to establish the terminology and method for presentation of these results, for use when sintering test data is required to be exchanged between separate parties, such as will be the case where a particular iron ore fines has been assessed for commercial reasons, or where research or production results are to be published.
1 Scope
This International Standard specifies a method for presentation of the results of sintering tests. It is applicable to all iron ore fines that are agglomerated by the sintering process.
Annexe A
International standards specifying the relevant test methods
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
| 1 | ISO 562:1981, Hard coal and coke — Determination of volatile matter content. |
| 2 | ISO 625:1975, Coal and coke — Determination of carbon and hydrogen — Liebig method. |
| 3 | ISO 1171:1981, Solid mineral fuels — Determination of ash. |
| 4 | ISO 2597:1985, Iron ores — Determination of total iron content — Titrimetric methods. |
| 5 | ISO 2598:1980, Iron ores — Determination of silicon content — Gravimetric methods. |
| 6 | ISO 2599:1983, Iron ores — Determination of phosphorus content — Titrimetric method. |
| 7 | ISO 3087:1987, Iron ores — Determination of moisture content of a consignment. |
| 8 | ISO 3271:1985, Iron ores — Determination of tumbler strength. |
| 9 | ISO 3852:1988, Iron ores — Determination of bulk density. |
| 10 | ISO 3886:1986, Iron ores — Determination of manganese content — Periodate spectrophotometric method. |
| 11 | ISO 4686:1980, Iron ores — Determination of silicon content — Reduced molybdosilicate spectrophotometric method. |
| 12 | ISO 4687:1984, Iron ores — Determination of phosphorus content — Molybdenum blue spectrophotometric method. |
| 13 | ISO 4688:1980, Iron ores — Determination of aluminium content — Flame atomic absorption spectrometric method. |
| 14 | ISO 4689:1986, Iron ores — Determination of sulfur content — Barium sulfate gravimetric method (Will be referenced ISO 4689-1 when revised). |
| 15 | ISO 4690:1986, Iron ores — Determination of sulfur content — Combustion method (Will be referenced ISO 4689-2 when revised). |
| 16 | ISO 4695:1984, Iron ores — Determination of reducibility. |
| 17 | ISO 4696:1984, Iron ores — Low-temperature disintegration test — Method using cold tumbling after static reduction. |
| 18 | ISO 4701:1985, Iron ores — Determination of size distribution by sieving. |
| 19 | ISO 6830:1986, Iron ores — Determination of aluminium content — EDTA titrimetric method. |
| 20 | ISO 6831:1986, Iron ores — Determination of sodium and/or potassium contents — Flame atomic absorption spectrometric method. |
| 21 | ISO 7215:1985, Iron ores — Determination of relative reducibility. |
| 22 | ISO 7335:1987, Iron ores — Determination of combined water content — Karl Fischer titrimetric method. |
| 23 | ISO 9035:1989, Iron ores — Determination of acid-soluble iron(II) content — Titrimetric method. |
| 24 | ISO 9507:1990, Iron ores — Determination of total iron content — Titanium(III) chloride reduction methods. |
| 25 | ISO 9508:1990, Iron ores — Determination of total iron content — Silver reduction titrimetric method. |
| 26 | ISO 10203:1992, Iron ores — Determination of calcium content — Flame atomic absorption spectrometric method. |
| 27 | ISO 10204:1992, Iron ores — Determination of magnesium content — Flame atomic absorption spectrometric method. |