※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 8361-1 は、流体輸送用のプラスチック パイプ、継手およびバルブに関する技術委員会 ISO/TC 138 によって作成されました。
ISO 8361 は、「熱可塑性プラスチックのパイプと継手 - 吸水」という一般タイトルの下、次の部分で構成されています。
- Part 1: 一般的なテスト方法
- Part 2: 非可塑化ポリ塩化ビニル(PVC-U) パイプおよび継手の試験条件
- Part 3: アクリロニトリル/ブタジエン/スチレン (ABS) パイプおよび継手の試験条件
注 —他の材質、すなわち塩素化ポリ塩化ビニル (PVC-C)、耐衝撃性ポリ塩化ビニル (PVC-HI)、およびアクリロニトリル/スチレン/アクリレート (ASA) で作られたパイプおよび継手も扱われます。後ほど追加パーツで説明します。
ISO 8361 のこの部分の付録 A は情報提供のみを目的としています。
1 スコープ
ISO 8361 のこの部分では、熱可塑性プラスチックのパイプと継手の吸水性を測定するための一般的な試験方法を指定しています。
2 規範的参照
以下の規格には、本書での参照を通じて ISO 8361 のこの部分の規定を構成する規定が含まれています。発行時点では、示されている版は有効でした。すべての規格は改訂される可能性があり、ISO 8361 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3126:1974, プラスチックパイプ - 寸法の測定。
- ISO 8361-2:1991, 熱可塑性プラスチックのパイプおよび継手 - 吸水性 - Part 2: 非可塑化ポリ (塩化ビニル) (PVC-U) パイプおよび継手の試験条件。
- ISO 8361-3:1991, 熱可塑性プラスチックのパイプおよび継手 - 吸水性 - Part 3: アクリロニトリル/ブタジエン/スチレン (ABS) パイプおよび継手の試験条件。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 8361-1 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids.
ISO 8361 consists of the following parts, under the general title Thermoplastics pipes and fittings — Water absorption:
- Part 1: General test method
- Part 2: Test conditions for unplasticized poly(vinyl chloride)(PVC-U) pipes and fittings
- Part 3: Test conditions for acrylonitrile/ butadiene/ styrene (ABS) pipes and fittings
NOTE — Pipes and fittings made of other materials, i.e. chlorinated poyly(vinyl chloride) (PVC-C), high-impact poly(vinyl chloride) (PVC-HI), and acrylonitrile/styrene/acrylate (ASA), will be dealt with later in additional parts.
Annex A of this part of ISO 8361 is for information only.
1 Scope
This part of ISO 8361 specifies a general test method for determining the water absorption of thermoplastics pipes and fittings.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 8361. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 8361 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 3126:1974, Plastics pipes — Measurement of dimensions.
- ISO 8361-2:1991, Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings.
- ISO 8361-3:1991, Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings.
Annex A
Bibliography
| 1 | ISO 62:1980, Plastics — Determination of water absorption. |