※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 8367-1 は、技術委員会 ISO/TC 122, 包装、小委員会 SC 2, 袋によって作成されました。
ISO 8367 は、 「包装 — 汎用袋の寸法許容差」という一般タイトルの下に、次の部分で構成されています。
- Part 1: 紙袋
- Part 2: 熱可塑性の柔軟なフィルムで作られた袋
1 スコープ
ISO 8367 のこの部分では、ISO 6590-1 で定義されている紙袋の製造に適用される一連の公差を指定します。
2 規範的参照
以下の規格には、本書での参照を通じて ISO 8367 のこの部分の規定を構成する規定が含まれています。発行時点では、示されている版は有効でした。すべての規格は改訂される可能性があり、ISO 8367 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 536:— 1) 、紙および板紙 — 坪量の決定。
- ISO 6590-1:1983, 包装 — 袋 — 語彙と種類 — Part 1: 紙袋。
- ISO 6591-1:1984, 包装 — 袋 — 説明と測定方法 — Part 1: 空の紙袋。
- ISO 7023:1983, 包装 — 袋 — テストのために空の袋をサンプリングする方法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 8367-1 was prepared by Technical Committee ISO/TC 122, Packaging, Sub-Committee SC 2, Sacks.
ISO 8367 consists of the following parts, under the general title Packaging — Dimensional tolerances for general purpose sacks:
- Part 1: Paper sacks
- Part 2: Sacks made from thermoplastic flexible film
1 Scope
This part of ISO 8367 specifies a set of tolerances applicable to the manufacture of paper sacks as defined in ISO 6590-1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 8367. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 8367 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 536:— 1) , Paper and board — Determination of grammage.
- ISO 6590-1:1983, Packaging — Sacks — Vocabulary and types — Part 1: Paper sacks.
- ISO 6591-1:1984, Packaging — Sacks — Description and method of measurement — Part 1: Empty paper sacks.
- ISO 7023:1983, Packaging — Sacks — Method of sampling empty sacks for testing.