※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 8456 は、ISO/TC 101 連続機械ハンドリング装置技術委員会によって作成されました。これは、European Mechanical Handling Confederation (FEM) の「セクション II — 継続的ハンドリング」によって実施された作業に基づいています。
ユーザーは、特に明記されていない限り、すべての国際規格は随時改訂されること、および他の国際規格への言及はその最新版を意味することに留意する必要があります。
1 スコープ
この国際規格は、ISO 1819 で定められた一般安全規則の補足として、ホッパー、サイロ、保管ビンおよびバンカー、ビンゲートなどのばら積み材料の保管装置に対する特別な安全規則を規定しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 8456 was prepared by Technical Committee ISO/TC 101, Continuous mechanical handling equipment. It is based on the work carried out by"Section II — Continuous handling" of the European Mechanical Handling Confederation (FEM).
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope
This International Standard gives, as an adjunct to the general safety rules laid down in ISO 1819, special safety rules for storage equipment for loose bulk materials, such as hoppers, silos, storage bins and bunkers, and bin gates.
3 References
- ISO 1819, Continuous mechanical handling equipment Safety code — General rules.
- ISO 7149, Continuous handling equipment — Safety code Special rules.