この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則に対する ISO の遵守に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 168, 義肢装具によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 8548-2:1993) を取り消して置き換えるものです。旧版からの主な変更点は次のとおりです。
- 切り株記述子 (表 1 から 7) が改訂されました。
- チームのすべてのメンバーが行う測定値のリストと、義肢装具士のみが行う追加の測定値が改訂されました (表 8)
ISO 8548 シリーズのすべての部品のリストは、ISO Web サイトにあります。
序章
このドキュメントは、切断断端を記述および測定するための標準的な方法を提供します。このような方法は、さまざまなチームによって提供される切断手術とリハビリテーションの結果を比較できるようにするために不可欠です。
この方法を使用する医療専門家には、さまざまな分野の外科医、他の医師 (特にリハビリテーションに関係する医師)、看護師、理学療法士、作業療法士、義肢装具士が含まれます。
このような方法は、疫学者や政府の保健当局にとっても価値があります。
1 スコープ
このドキュメントは、下肢切断断端を記述および測定する方法を確立します。また、プロテーゼの提供に必要な寸法も記載されています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 8549-2, 義肢装具 — 語彙 — 2: 外肢義足および義足装着者に関する用語
- ISO 8549-4, 義肢装具 — 語彙 — 4: 四肢切断に関する用語
3 用語と定義
このドキュメントの目的のために、ISO 8549-2 および ISO 8549-4 に記載されている用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 168, Prosthetics and orthotics.
This second edition cancels and replaces the first edition (ISO 8548-2:1993), which has been technically revised. The main changes to the previous edition are as follows:
- the stump descriptors (Tables 1 to 7) have been revised;
- the lists of measurements to be taken by all members of the team and the additional measurements to be taken only by the prosthetist have been revised (Table 8).
A list of all parts in the ISO 8548 series can be found on the ISO website.
Introduction
This document provides a standard method for describing and measuring amputation stumps. Such a method is essential to allow comparisons of the outcomes of amputation surgery and rehabilitation provided by different teams.
The healthcare professionals who will use the method include surgeons of different disciplines, other doctors (especially those concerned with rehabilitation), nurses, physical and occupational therapists and prosthetists.
Such a method is also of value to epidemiologists and government health officials.
1 Scope
This document establishes a method of describing and measuring lower limb amputation stumps. It also lists the measurements required for the provision of a prosthesis.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 8549-2, Prosthetics and orthotics — Vocabulary — 2: Terms relating to external limb prostheses and wearers of these prostheses
- ISO 8549-4, Prosthetics and orthotics — Vocabulary — 4: Terms relating to limb amputation
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 8549-2 and ISO 8549-4 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses: