※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 8694 は、技術委員会 ISO/TC 29, 小型工具、小委員会 SC 8, プレスおよび成形用工具によって作成されました。
この第 3 版は、マイナー リビジョンを構成する第 2 版 (ISO 8694:1998) を廃止し、置き換えるものです。特に、表面テクスチャの表示は ISO 1302:2002 に従って更新されました。
1 スコープ
この国際規格は、圧縮金型、射出成形金型、および鋳造金型に使用される、円筒形の頭部を備えた肩付きエジェクター ピンの寸法と公差をミリメートル単位で指定します。
また、材料のガイドラインと硬度の要件も示し、肩付きエジェクター ピンの指定も指定します。
円筒形のヘッドを備えたエジェクタ ピンは ISO 6751 で指定されています。フラットエジェクタピンは ISO 8693 で指定されています。
参考文献
| 1 | ISO 1302:2002, 幾何学的製品仕様書 (GPS) — 製品技術文書における表面テクスチャの表示 |
| 2 | ISO 6751, 成形用ツール - 円筒形ヘッド付きエジェクターピン |
| 3 | ISO 8693, 成形用ツール — フラットエジェクターピン |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8694 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 8, Tools for pressing and moulding.
This third edition cancels and replaces the second edition (ISO 8694:1998), of which it constitutes a minor revision. In particular, the indication of surface textures has been updated in accordance with ISO 1302:2002.
1 Scope
This International Standard specifies the dimensions and tolerances, in millimetres, of shouldered ejector pins with cylindrical head which are used in compression and injection moulds and in die casting dies.
It also gives material guidelines and hardness requirements, and specifies the designation of shouldered ejector pins.
Ejector pins with cylindrical head are specified in ISO 6751; flat ejector pins are specified in ISO 8693.
Bibliography
| 1 | ISO 1302:2002, Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation |
| 2 | ISO 6751, Tools for moulding — Ejector pins with cylindrical head |
| 3 | ISO 8693, Tools for moulding — Flat ejector pins |