※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 8695 は、技術委員会 ISO/TC 29, 小型工具、小委員会 SC 8, プレスおよび成形用工具によって作成されました。
この第 2 版は、第 1 版 (ISO 8695:1987) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。特に、条項 2 が削除され、参考文献が追加されました。
1 スコープ
この国際規格は、主なタイプのパンチの命名法と用語、それらの特徴と寸法特性を確立します。
この国際規格は、パンチのユーザーと製造業者の参考となることを意図しています。
注記 1図は、用語を説明するための例としてのみ提供されています。
注記 2 ISO の 3 つの公式言語のうちの 2 つである英語とフランス語で使用される用語に加えて、この国際規格では、ドイツ語とイタリア語で同等の用語を示しています。これらは、ドイツ (DIN) およびイタリア (UNI) のメンバー団体の責任の下で公開されており、情報提供のみを目的としています。 ISOの用語および定義と見なすことができるのは、公用語で与えられた用語および定義のみです。
2 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
2.1
パンチブランク
標準寸法と公差のストレートシャンク付きパンチ
注記 1:任意の特定の点形状に機械加工することを目的としています。
2.2
穴あけパンチ
パンチで穴を開け、その先端をストックとダイに押し込み、同時に穴とスラグを作る
注記 1:穴またはスラグのいずれかが必要な部品である可能性があります。
2.3
パイロットパンチ
丸みを帯びたノーズポイントエンドを備えたパンチ。これは、さまざまな形状の以前に作成された穴に入り、ダイ内のストックをピックアップして正確に配置します
2.4
エジェクターでパンチ
スラグがダイ キャビティの公差から引き戻されるのを防ぐために、パンチ ポイントの端からスラグを機械的に分離するエジェクタを使用してパンチします。
参考文献
| [1] | ISO 6752, プレス用ツール — 60 度の円錐ヘッドとストレート シャンクを備えたラウンド パンチ |
| [2] | ISO 8020, プレス用ツール — 円筒形ヘッドとストレートまたは縮小シャンクのパンチ |
| [3] | ISO 10071-1, プレス用ツール — ボールロック パンチ — 1: 軽作業用ボールロックパンチ |
| [4] | ISO 10071-2, プレス用ツール — ボールロック パンチ — 2: 重荷重用ボールロックパンチ |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8695 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 8, Tools for pressing and moulding.
This second edition cancels and replaces the first edition (ISO 8695:1987), of which it constitutes a minor revision. In particular, Clause 2 has been deleted and a Bibliography has been added.
1 Scope
This International Standard establishes the nomenclature and terminology of the main types of punches, their features and dimensional characteristics.
This International Standard is intended to serve as a reference for punch users and manufacturers.
NOTE 1 The figures are given only as examples to illustrate the terminology.
NOTE 2 In addition to terms used in English and French, two of the three official ISO languages, this International Standard gives the equivalent terms in German and Italian; these are published under the responsibility to the member bodies for Germany (DIN) and Italy (UNI), and are given for information only. Only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1
punch blank
punch with straight shank with standard dimensions and tolerances
Note 1 to entry: It is intended for machining to any particular point shape.
2.2
perforating punch
punch to produce holes, the point end of which is forced through the stock and a die, simultaneously producing a hole and a slug
Note 1 to entry: Either the hole or the slug can be the required part.
2.3
pilot punch
punch with a radiused nose point end, which enters previously made holes of various shapes to pick up and accurately locate the stock within the die
2.4
punch with ejector
punch with an ejector, which mechanically separates the slug from the end of the punch point to prevent the slug being pulled back out of the die cavity tolerances
Bibliography
| [1] | ISO 6752, Tools for pressing — Round punches with 60 degrees conical head and straight shank |
| [2] | ISO 8020, Tools for pressing — Punches with cylindrical head and straight or reduced shank |
| [3] | ISO 10071-1, Tools for pressing — Ball-lock punches — 1: Ball-lock punches for light duty |
| [4] | ISO 10071-2, Tools for pressing — Ball-lock punches — 2: Ball-lock punches for heavy duty |