※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 3 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この国際規格の要素の一部が特許権の対象となる可能性が注目されています。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO 8718 は、技術委員会 ISO/TC 22, 道路車両、小委員会 SC 15, 商用車とバスのコンポーネントの互換性によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 8718:1988) を廃止し、置き換えます。
1 スコープ
この国際規格は、40 mm および 50 mm のドローバー カップリングとヒンジ付きドローバーの対応するドローバー アイの強度試験条件と要件を指定します。
注カップリングについては ISO 3584 [1] 、アイについては ISO 1102 [2] および ISO 8755 [3] を参照してください。
2 基準参照
以下の規範文書には、本文中の参照を通じてこの国際規格の規定を構成する規定が含まれています。日付が古い参照については、これらの出版物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することが推奨されます。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 1176, 道路車両 — 大衆 — 語彙およびコード
3 用語と定義
この国際規格の目的には、ISO 1176 で与えられる用語と定義が適用されます。
参考文献
| 1 | ISO 3584, 道路車両 — ドローバーカップリング — 互換性 |
| 2 | ISO 1102, 商用道路車両 — 50 mm ドローアブルアイ — 互換性 |
| 3 | ISO 8755, 商用道路車両 — 40 mm ドローバー アイ — 互換性 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 8718 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 15, Interchangeability of components of commercial vehicles and buses.
This second edition cancels and replaces the first edition (ISO 8718:1988), which has been technically revised.
1 Scope
This International Standard specifies strength test conditions and requirements for the 40 mm and 50 mm drawbar couplings and corresponding drawbar eyes for hinged drawbars.
NOTE See ISO 3584 [1] for couplings, and ISO 1102 [2] and ISO 8755 [3] for eyes.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 1176, Road vehicles — Masses — Vocabulary and codes
3 Terms and definitions
For the purposes of this International Standard, the terms and definitions given in ISO 1176 apply.
Bibliography
| 1 | ISO 3584, Road vehicles — Drawbar couplings — Interchangeability |
| 2 | ISO 1102, Commercial road vehicles — 50 mm drawbar eye — Interchangeability |
| 3 | ISO 8755, Commercial road vehicles — 40 mm drawbar eye — Interchangeability |