※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 8738 は、技術委員会 ISO/TC 2, ファスナーによって作成されました。
ユーザーは、すべての国際規格が随時改訂されること、および他の国際規格への参照は、別段の記載がない限り、その最新版を意味することに注意する必要があります。
1 適用範囲と適用分野
この国際規格は、ISO 2340 および ISO 2341 に従って、クレビス ピン用の平座金の特性を指定します。
この国際規格に準拠した平座金は、割ピンの端部のみに使用する必要があります。
2 参考文献
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 8738 was prepared by Technical Committee ISO/TC 2, Fasteners.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
This International Standard specifies the characteristics of plain washers for clevis pins according to ISO 2340 and ISO 2341.
Plain washers in accordance with this International Standard shall be used on the cotter pin end only.
2 References
- ISO 2081,Metallic coatings — Electroplated coatings of zinc on iron or steel.
- ISO 2340,Clevis pins without head.
- ISO 2341,Clevis pins with head.
- ISO 3269,Fasteners — Acceptance inspection.
- ISO 4520,Chromate conversion coatings on electroplated zinc and cadmium coatings.
- ISO 4759/3,Tolerances for fasteners — 3: Washers for metric bolts, screws and nuts with thread diameters from 1 up to and including 150 mm — Product grades A and C.