※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 8750 は、技術委員会 ISO/TC 2, ファスナー、小委員会 SC 10, ファスナーの製品規格によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 8750:1997) を取り消して置き換えるものです。
1 スコープ
この国際規格は、公称直径d1が 0.8 mm から 20 mm までの、鋼またはオーステナイト系またはマルテンサイト系のステンレス鋼で作られた、コイル状の標準負荷スプリング タイプ ストレート ピンの特性を指定します。
注記ばね式ストレートピン (コイル状、ヘビーデューティー) およびばね式ストレートピン (コイル状、軽量) は、それぞれ ISO 8748 および ISO 8751 の対象です。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 286-2, 限界とはめあいの ISO システム — 2: 穴と軸の標準公差等級と限界偏差の表
- ISO 3269, ファスナー — 受け入れ検査
- ISO 4042, ファスナー — 電気メッキコーティング
- ISO 6507-1, 金属材料 —ビッカース硬さ試験— 1: 試験方法
- ISO 8749, ピンおよび溝付きピン — せん断試験
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8750 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 10, Product standards for fasteners.
This third edition cancels and replaces the second edition (ISO 8750:1997), which has been technically revised.
1 Scope
This International Standard specifies the characteristics of coiled, standard duty spring-type straight pins made of steel or of austenitic or martensitic stainless steel, with a nominal diameter, d1, from 0,8 mm to 20 mm inclusive.
NOTE Spring-type straight pins, coiled, heavy duty, and spring type straight pins, coiled, light duty, are the subjects of ISO 8748 and ISO 8751, respectively.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 286-2, ISO system of limits and fits — 2: Tables of standard tolerance grades and limit deviations for holes and shafts
- ISO 3269, Fasteners — Acceptance inspection
- ISO 4042, Fasteners — Electroplated coatings
- ISO 6507-1, Metallic materials —Vickers hardness test — 1: Test method
- ISO 8749, Pins and grooved pins — Shear test
Bibliography
| [1] | ISO 8748, Spring-type straight pins — Coiled, heavy duty |
| [2] | ISO 8751, Spring-type straight pins — Coiled, light duty |