※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 8758 は、ISO/TC 36 の映画撮影技術委員会によって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、16 mm 映画のオリジナル、中間体およびプリント、35 mm 映画カメラのネガ、および 35 mm 映画リリース プリント上の写真管理およびデータ記録の位置と寸法を指定します。
また、制御データ再生器によってスキャンされる幅、および再生器のスペクトル感度も指定します。
リリースプリントの場合、この国際規格は、ISO 2939 および ISO 7343 に準拠した可変領域サウンドレコードを含むものに制限されます。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 2939:1986, 映画撮影 — 35 mm 映画リリース プリント上の画像領域と写真サウンド記録 — 位置と寸法。
- ISO 7343:1983, 映画撮影 - 35 mm 映画プリント上の 2 トラック写真サウンド記録 - 位置と幅の寸法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 8758 was prepared by Technical Committee ISO/TC 36, Cinematography.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies the location and dimensions of photographic control and data records on 16 mm motion-picture originals, intermediates and prints, 35 mm motion-picture camera negatives and 35 mm motion-picture release prints.
It also specifies the width scanned by the control data reproducer, and the reproducer spectral sensitivity.
In the case of release prints, this International Standard is restricted to those containing variable area sound records in accordance with ISO 2939 and ISO 7343.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 2939:1986, Cinematography — Picture image area and photographic sound record on 35 mm motion-picture release prints — Position and dimensions.
- ISO 7343:1983, Cinematography — Two-track photographic sound records on 35 mm motion-picture prints — Positions and width dimensions.