※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 897 は、技術委員会 ISO/TC 42, Photographyによって作成されました。
この第 3 版は、技術改訂を構成する第 2 版 (ISO 897:1988) を取り消して置き換えるものです。
1 スコープ
この国際規格は、ロール フィルム、およびエッジ マーキングを含む 126, 110, および 135 サイズのフィルムの画像を保持する面を識別するさまざまな方法を指定します。
この国際規格は、映画用フィルムには適用されません。
2 規範的参照
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 13450:1996, 写真 - 110 サイズのカートリッジ、フィルム、裏紙 - 寸法。
参考文献
| [1] | ISO 732:2000, 写真 - 120 サイズおよび 220 サイズのフィルム - 寸法。 |
| [2] | ISO 1007:2000, 写真 — 135 サイズのフィルムおよび雑誌 — 仕様。 |
| [3] | ISO 3029:1995, 写真 — 126 サイズのカートリッジ — カートリッジ、フィルム、裏紙の寸法。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 897 was prepared by Technical Committee ISO/TC 42, Photography.
This third edition cancels and replaces the second edition (ISO 897:1988), of which it constitutes a technical revision.
1 Scope
This International Standard specifies different means of identification of the image-bearing side of roll films and 126, 110 and 135-size films that carry edge markings.
This International Standard is not applicable to cinematographic films.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 13450:1996, Photography - 110-size cartridge, film and backing paper — Dimensions.
Bibliography
| [1] | ISO 732:2000, Photography — 120-size and 220-size films — Dimensions. |
| [2] | ISO 1007:2000, Photography — 135-size film and magazine — Specifications. |
| [3] | ISO 3029:1995, Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper. |