※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9030 は、ISO/TC 28石油製品および潤滑油技術委員会によって作成されました。
付属書 A および付属書 B は、この国際規格の不可欠な部分を形成します。
警告 — この国際規格の使用には、危険な物質、作業、および機器が含まれる可能性があります。この規格は、その使用に関連するすべての安全上の問題に対処することを目的とするものではありません。適切な安全衛生慣行を確立し、使用前に規制上の制限の適用可能性を判断することは、この規格のユーザーの責任です。
1 スコープ
この国際規格は、遠心分離手順による原油中の水分と沈殿物の実験室測定方法を規定しています。精度データは、1% ( V/V ) までの水分含有量についてのみ決定されています。
注 1水と沈殿物の遠心分離法では、多くの場合、誤った結果が得られる可能性があることが観察されています。これは、代表的なサンプルを得るために高速ミキサーを使用した場合に特に当てはまります。したがって、この方法は完全に満足のいくものではなく、測定された水の量はほとんどの場合、実際の水分含有量よりも低くなります。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3170:1988, 石油液体 - 手動サンプリング。
- ISO 3171:1988, 石油液体 - パイプラインの自動サンプリング。
- ISO 4787:1984, 実験用ガラス器具 — 容積測定用ガラス器具 — 容量の使用およびテストの方法。
- ISO 5272:1979, 工業用トルエン — 仕様。
- ISO 9029:1990, 原油 - 水の測定 - 蒸留法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9030 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants.
Annexes A and B form an integral part of this International Standard.
WARNING — The use of this International Standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard specifies a method for the laboratory determination of water and sediment in crude oils by means of a centrifuge procedure. The precision data have only been determined for water contents up to 1 % (V/V).
NOTE 1 It has been observed that centrifugal methods of determination of water and sediment may, in many cases, give erroneous results. This is especially so when use of a high-speed mixer has been employed to obtain a representative sample. The method is therefore not entirely satisfactory and the amount of water determined is almost always lower than the actual water content.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 3170:1988, Petroleum liquids — Manual sampling.
- ISO 3171:1988, Petroleum liquids — Automatic pipeline sampling.
- ISO 4787:1984, Laboratory glassware — Volumetric glassware — Methods for use and testing of capacity.
- ISO 5272:1979, Toluene for industrial use — Specifications.
- ISO 9029:1990, Crude petroleum — Determination of water — Distillation method.