※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
この文書を担当する委員会は、ISO/TC 10, 技術製品文書です。
この第 3 版は、マイナー リビジョンを構成する第 2 版 (ISO 9177-1:2011) を取り消して置き換えるものです。
ISO 9177 は、技術図面用シャープ ペンシルという一般的なタイトルの下に、次の部分で構成されています。
- Part 1: 分類、寸法、性能要件、およびテスト
- Part 2:黒リード — 分類と寸法
- Part 3: 黒リード — HB リードの曲げ強度
1 スコープ
ISO 9177 のこの部分は、製図に使用される手持ち式シャープペンシルの分類、寸法、性能要件、および試験を規定しています。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 128-20, 製図 — プレゼンテーションの一般原則 — 20: 行の基本的な規則
- ISO 9177-2, シャープペンシル — 2: 黒リード — 分類と寸法
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
シャープペンシル
製図用の、リードを保持して送り出すハンドヘルド ライン作成ツール
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 10, Technical product documentation.
This third edition cancels and replaces the second edition (ISO 9177-1:2011), of which it constitutes a minor revision.
ISO 9177 consists of the following parts, under the general title Mechanical pencilsfor technical drawings:
- Part 1: Classification, dimensions, performance requirements and testing
- Part 2:Black leads — Classification and dimensions
- Part 3: Black leads — Bending strengths of HB leads
1 Scope
This part of ISO 9177 specifies classification, dimensions, performance requirements and testing for hand-held mechanical pencils used for technical drawings.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 128-20, Technical drawings — General principles of presentation — 20: Basic conventions for lines
- ISO 9177-2, Mechanical pencils — 2: Black leads — Classification and dimensions
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
mechanical pencil
hand-held line-producing tool which holds and feeds out a lead, for technical drawings