※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 9183-2 は、技術委員会 ISO/TC 29, 小型工具、小委員会 SC 8, プレスおよび成形用工具によって作成されました。
この第 2 版は、第 1 版 (ISO 9183-2:1993) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。特に、ISO 1302:2002 に従って、表面テクスチャの表示が更新されました。
ISO 9183 は、プレス用工具 - プレス金型用摩耗板という一般的なタイトルの下に、次の部分で構成されています。
- Part 1: タイプ A
- Part 2: タイプ B
1 スコープ
ISO 9183 のこのパートでは、主に大型プレスでの使用を目的としたタイプ B の摩耗板の基本的な寸法と公差をミリメートル単位で指定しています。また、取り付け用のクリアランス ホールのサイズと位置も指定します。
これは、材料と硬度に関するガイダンスを提供し、ISO 9183 のこの部分の要件を満たすタイプ B のプレス金型用の摩耗プレートの指定を指定します。
参考文献
| [1] | ISO 1302:2002, Geometrical Product Specifications (GPS) — 技術製品ドキュメントにおける表面テクスチャの表示 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9183-2 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 8, Tools for pressing and moulding.
This second edition cancels and replaces the first edition (ISO 9183-2:1993), of which it constitutes a minor revision. In particular, the indication of surface textures has been updated in accordance with ISO 1302:2002.
ISO 9183 consists of the following parts, under the general title Tools for pressing — Wear plates for press dies:
- Part 1: Type A
- Part 2: Type B
1 Scope
This part of ISO 9183 specifies the basic dimensions and tolerances, in millimetres, of wear plates, type B, intended for use mainly in large presses. lt also specifies the size and positions of the clearance holes for attachment.
lt gives guidance on the materials and hardness, and specifies the designation of wear plates for press dies, type B, which meet the requirements of this part of ISO 9183.
Bibliography
| [1] | ISO 1302:2002, Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation |