※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 9292 は、技術委員会 ISO/TC 65, マンガンおよびクロム鉱石によって作成されました。
1 スコープ
この国際規格は、1,10-フェナントロリンを使用してマンガン鉱石および精鉱中の総鉄含有量を測定するための分光法を指定しています。この方法は、総鉄含有量が 0.1% ( m/ m ) から 15% ( m/ m ) の製品に適用できます。
この国際規格は、ISO 4297 と併せて読む必要があります。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下にリストされている規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 4296-1:1984, マンガン鉱石のサンプリング — I: インクリメンタル サンプリング。
- ISO 4296-2:1983, マンガン鉱石のサンプリング — 2: サンプルの準備。
- ISO 4297:1978, マンガン鉱石および濃縮物 — 化学分析の方法 — 一般的な指示。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 9292 was prepared by Technical Committee ISO/TC 65, Manganese and chromium ores.
1 Scope
This International Standard specifies a spectrometric method for the determination of total iron content in manganese ores and concentrates using 1,10-phenanthroline. The method is applicable to products having a total iron content from 0,1 % (m/m) to 15 % (m/m).
This International Standard should be read in conjunction with ISO 4297.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 4296-1: 1984, Manganese ores Sampling — I: Increment sampling.
- ISO 4296-2: 1983, Manganese ores Sampling — 2: Preparation of samples.
- ISO 4297: 1978, Manganese ores and concentrates — Methods of chemical analysis — General instructions.