この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 9311-2 は、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 193, 接着剤、技術委員会 ISO/TC 138, 流体の輸送のためのプラスチック パイプ、継手およびバルブ、小委員会 SC 5 と協力して作成されました。 ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に基づく、プラスチック材料のパイプ、継手、バルブ、およびそれらの付属品の一般的な特性 — 試験方法と基本仕様。
この第 2 版は、技術的に改訂された第 1 版 (ISO 9311-2:2002) を取り消して置き換えるものです。
ISO 9311 は、熱可塑性配管システムの接着剤という一般的なタイトルの下に、次の部分で構成されています。
- Part 1: フィルム特性の測定
- Part 2: せん断強度の測定
- Part 3: 内圧に対する抵抗を測定するための試験方法
序章
ISO 9311 のこの部分の目的は、記載されているように準備された試験片を使用して接着接合部のせん断強度を測定することにより、熱可塑性配管システムの接着剤を特徴付ける方法を説明することです。この方法で得られた結果は、破壊的なせん断力に対する別の標本 (おそらく実際の物品) の抵抗に外挿することはできません。
安全上の注意 — このドキュメントを使用する人は、該当する場合、通常の実験室の慣行に精通している必要があります。このドキュメントは、その使用に関連する安全上の問題のすべてに対処することを目的としていません。適切な安全衛生慣行を確立し、規制条件を確実に遵守することは、ユーザーの責任です。
注意 - この規格で許可されている材料の中には、環境に悪影響を与えるものがあることが理解されています。技術的な利点により、これらの材料の代替品が受け入れられるようになるため、可能な限りこの規格から除外されます。
試験終了後、規格の使用者は地域の規制に従って廃棄物を適切に処分するように注意するものとします。
1 スコープ
ISO 9311 のこのパートでは、熱可塑性配管システム用の接着剤で作られた接合部のせん断強度を決定する方法を指定しています。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 15605, 接着剤 - サンプリング
- EN 923, 接着剤 — 用語と定義
- EN 1067, 接着剤 - 試験用サンプルの検査と準備
3 用語と定義
このドキュメントの目的のために、EN 923 および以下に記載されている用語と定義が適用されます。
3.1
直径クリアランス
パイプの平均外径とソケットの平均内径の差
参考文献
| [1] | EN 14680:2006, 非加圧熱可塑性配管システム用接着剤 — 仕様 |
| [2] | EN 14814:2007, 加圧流体用熱可塑性配管システム用接着剤 — 仕様 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9311-2 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 193, Adhesives, in collaboration with Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 9311-2:2002), which has been technically revised.
ISO 9311 consists of the following parts, under the general title Adhesives for thermoplastic piping systems:
- Part 1: Determination of film properties
- Part 2: Determination of shear strength
- Part 3: Test method for the determination of resistance to internal pressure
Introduction
The aim of this part of ISO 9311 is to describe a method to characterize adhesives for thermoplastic piping systems by measuring the shear strength of a bonded joint using a test specimen prepared as described. The results obtained with this method cannot be extrapolated into the resistance of a different specimen – perhaps the real life article – to destructive shear forces.
SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions.
CAUTION — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible.
At the end of the test, the user of the standard shall take care to carry out an appropriate disposal of the wastes, according to local regulation.
1 Scope
This part of ISO 9311 specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 15605, Adhesives — Sampling
- EN 923, Adhesives — Terms and definitions
- EN 1067, Adhesives — Examination and preparation of samples for testing
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 923 and the following apply.
3.1
diametrical clearance
difference between the mean outside diameter of the pipe and the mean inside diameter of the socket
Bibliography
| [1] | EN 14680:2006, Adhesives for non-pressure thermoplastic piping systems — Specifications |
| [2] | EN 14814:2007, Adhesives for thermoplastic piping systems for fluids under pressure — Specifications |