※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
ISO 9330 のこの部分の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO 9330-4 は、技術委員会 ISO/TC 17, 鋼、小委員会 SC 19, 圧力目的の鋼管の技術的配送条件によって作成されました。
ISO 9330 は、次の部分で構成されており、一般的なタイトルは、圧力目的の溶接鋼管 - 技術的な配送条件です。
- Part 1: 指定された室温特性を持つ非合金鋼管
- Part 2: 特定の高温特性を有する電気抵抗および誘導溶接された非合金および合金鋼管
- Part 3: 特定の低温特性を備えた電気抵抗および誘導溶接された非合金および合金鋼管
- Part 4: 指定された高温特性を備えたサブマージ アーク溶接された非合金鋼および合金鋼管
- Part 5: 指定された低温特性を備えたサブマージ アーク溶接された非合金鋼および合金鋼管
- Part 6: 縦方向に溶接されたオーステナイト系ステンレス鋼管
ISO 9330 のこの部分の附属書 A は、情報提供のみを目的としています。
1 スコープ
ISO 9330 のこの部分は、指定された高温特性を備えた非合金鋼または合金鋼で作られた円形断面のサブマージ アーク溶接管の技術的な納入条件を指定しています。これらのチューブは、蒸気発生装置の建設や配管の相互接続など、材料が高温にさらされる場合の圧力目的を目的としています。
ユーザーは、適切な国際アプリケーション標準および関連する国内法規制の要件を考慮する必要があります。ボイラーおよび圧力容器については、国際規格 ISO 831, ISO 2604, および ISO 5730 が利用可能です。
一般的な技術提供要件については、ISO 404 を参照してください。
注英語の「tube」と「pipe」は発音されます。
2 参考文献
以下の規範文書には、このテキストで参照することにより、ISO 9330 のこの部分の規定を構成する規定が含まれています。ただし、ISO 9330 のこの部分に基づく契約の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 148:1983 1) 、スチール — シャルピー衝撃試験 (V ノッチ)
- ISO 377:1997, 鉄鋼および鉄鋼製品 — 機械試験用のサンプルおよび試験片の場所と準備。
- ISO 404:1992, 鉄鋼および鉄鋼製品 — 一般的な技術納入要件。
- ISO 783:1999, 金属材料 — 高温での引張試験。
- ISO 2566-1:1984, スチール — 伸び値の変換 — 1: 炭素鋼および低合金鋼。
- ISO 3205:1976, 推奨試験温度。
- ISO 3545-1:1989, 鋼管および付属品 — 仕様で使用する記号 — 1: 断面が円形のチューブおよび管状付属品。
- ISO 4200:1991, 平端鋼管、溶接および継ぎ目なし — 寸法および単位長さあたりの質量の一般表。
- ISO 4948-1:1982, 鋼 — 分類 — 1: 化学組成に基づく非合金鋼と合金鋼への鋼の分類。
- ISO/TR 4949:1989, 文字記号に基づく鋼名。
- ISO 5173:1981, 鋼の溶着突合せ継手 - 横ルートおよび面曲げ試験。
- ISO 5177:1981, 鋼の溶着突合せ継手 - 横方向曲げ試験。
- ISO 5252:1991, 鋼管 - 公差システム。
- ISO 6761:1981, スチール チューブ — 溶接用チューブおよび継手の端部の準備。
- ISO 6892:1998, 金属材料 - 周囲温度での引張試験。
- ISO 7438:1985, 金属材料 — 曲げ試験。
- ISO 9765:1990, 圧力目的のサブマージ アーク溶接鋼管 - 縦方向および/または横方向の欠陥を検出するための溶接シームの超音波検査。
- ISO 10474:1991, 鉄鋼および鉄鋼製品 — 検査文書。
- ISO 11496:1993, 圧力目的のためのシームレスおよび溶接鋼管 - 層流の欠陥を検出するための管端の超音波検査。
- ISO 12094:1994, 圧力目的のための溶接鋼管 - 溶接管の製造に使用されるストリップ/プレートの層状欠陥の検出のための超音波検査。
- ISO 12096:1996, 圧力目的のためのサブマージ アーク溶接鋼管 - 欠陥の検出のための溶接シームの放射線検査。
- ISO 14284:1996, 鋼鉄および鉄 — 化学組成の決定のためのサンプルのサンプリングおよび準備。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 9330 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 9330-4 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 19, Technical delivery conditions for steel tubes for pressure purposes.
ISO 9330 consists of the following parts, under the general title Welded steel tubes for pressure purposes — Technical delivery conditions:
- Part 1: Unalloyed steel tubes with specified room temperature properties
- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
- Part 6: Longitudinally welded austenitic stainless steel tubes
Annex A of this part of ISO 9330 is for information only.
1 Scope
This part of ISO 9330 specifies the technical delivery conditions for submerged arc-welded tubes of circular cross-section, made of unalloyed or alloyed steel with specified elevated temperature properties. These tubes are intended for pressure purposes in cases when the material is also subjected to elevated temperatures, e.g. for the construction of steam generating equipment and for interconnecting pipework.
The requirements of appropriate international application standards and relevant national legal regulations shall be taken into account by the user. For boilers and pressure vessels International Standards ISO 831, ISO 2604 and ISO 5730 are available.
For the general technical delivery requirements, see ISO 404.
NOTE The English words “tube” and “pipe” are synonymous.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 9330. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 9330 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 148:1983 1) , Steel — Charpy impact test (V-notch).
- ISO 377:1997, Steel and steel products — Location and preparation of samples and test pieces for mechanical testing.
- ISO 404:1992, Steel and steel products — General technical delivery requirements.
- ISO 783:1999, Metallic materials — Tensile testing at elevated temperature.
- ISO 2566-1:1984, Steel — Conversion of elongation values — 1: Carbon and low alloy steels.
- ISO 3205:1976, Preferred test temperatures.
- ISO 3545-1:1989, Steel tubes and fittings — Symbols for use in specifications — 1: Tubes and tubular accessories with circular cross-section.
- ISO 4200:1991, Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length.
- ISO 4948-1:1982, Steels — Classification — 1: Classification of steels into unalloyed and alloy steels based on chemical composition.
- ISO/TR 4949:1989, Steel names based on letter symbols.
- ISO 5173:1981, Fusion welded butt joints in steel — Transverse root and face bend test.
- ISO 5177:1981, Fusion welded butt joints in steel — Transverse side bend test.
- ISO 5252:1991, Steel tubes — Tolerance systems.
- ISO 6761:1981, Steel tubes — Preparation of ends of tubes and fittings for welding.
- ISO 6892:1998, Metallic materials — Tensile testing at ambient temperature.
- ISO 7438:1985, Metallic materials — Bend test.
- ISO 9765:1990, Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections.
- ISO 10474:1991, Steel and steel products — Inspection documents.
- ISO 11496:1993, Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections.
- ISO 12094:1994, Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in strip/plates used in the manufacture of welded tubes.
- ISO 12096:1996, Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections.
- ISO 14284:1996, Steel and iron — Sampling and preparation of samples for the determination of chemical composition.