※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9330-6 は、技術委員会 ISO/TC 17, 鋼、小委員会 SC 19, 圧力目的の鋼管の技術的配送条件によって作成されました。
これは、ISO 2604-5:1978 の部分的な改訂を構成します。
ISO 9330 は、次の部分で構成されており、一般的なタイトルは、圧力目的の溶接鋼管 - 技術的な配送条件です。
- Part 1: 指定された室温特性を持つ非合金鋼管
- Part 2: 特定の高温特性を有する電気抵抗および誘導溶接された非合金および合金鋼管
- Part 3: 特定の低温特性を備えた電気抵抗および誘導溶接された非合金および合金鋼管
- Part 4: 指定された高温特性を備えたサブマージ アーク溶接された非合金鋼および合金鋼管
- Part 5: 指定された低温特性を備えたサブマージ アーク溶接された非合金鋼および合金鋼管
- Part 6: 縦方向に溶接されたオーステナイト系ステンレス鋼管
ISO 9330 のこの部分の附属書 A および B は、情報提供のみを目的としています。
1 スコープ
1.1 ISO 9330 のこの部分は、オーステナイト系ステンレス鋼で作られた円形断面の縦方向に溶接されたチューブの技術的な配送条件を指定します。このチューブは、室温、低温、または高温での耐圧および耐食性の目的で適用されます。これらのチューブは、圧力容器、化学プラント、蒸気発生装置の建設、およびパイプ作業の相互接続など、圧力目的を目的としています。
ISO 9330 のこの部分に従って製造されたチューブは、使用目的に応じて、指定された室温特性、指定された低温靭性特性、および指定された高温での耐力値を備えている場合があります。
アプリケーションをカバーする適切な国際規格 (ISO 1129, ISO 2037, ISO 6759, ISO 7598 など) および関連する国内法規の要件は、ユーザーによって考慮されなければなりません。ボイラーおよび圧力容器については、ISO/R 831 および ISO 5730 が利用可能です。
ノート
- 1 「チューブ」という言葉は「パイプ」と同義です。
- 2 ISO 9330 のこの部分は、非円形断面のチューブの製造の基礎としても使用できます。この場合、ISO 9330 のこの部分で引用されている化学分析および機械的特性の値が適用されます。他のすべての要件は、購入者と製造業者の間の合意によるものです。
ISO 9330 のこの部分は対象外です。
- a)石油および天然ガス産業で使用するためのケーシング、チューブ、ドリルパイプ、およびラインパイプ。他の
- b)ガス、水、下水の輸送用の管。
1.2一般的な技術提供要件については、ISO 404 を参照してください。
2 参考文献
以下の規格には規定が含まれており、このテキストで参照することにより、ISO 9330 のこの部分の規定を構成します。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 9330 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 148:1983, スチール — シャルピー衝撃試験 (V ノッチ)
- ISO 377-1:1989, 鍛鋼のサンプルと試験片の選択と準備 — 1: 機械試験用のサンプルと試験片。
- ISO 404:1992, 鉄鋼および鉄鋼製品 — 一般的な技術納入要件。
- ISO 683-13:1986, 熱処理可能な鋼、合金鋼および快削鋼 — 13: 鍛造ステンレス鋼。
- ISO 783:1989, 金属材料 - 高温での引張試験。
- ISO/R 831:1968, 固定ボイラーの建設規則。
- ISO 1127:1992, ステンレス鋼管 — 単位長さあたりの寸法、公差、および従来の質量。
- ISO 1129:1980, ボイラー、過熱器、および熱交換器用鋼管 - 単位長さあたりの寸法、公差、および従来の質量。
- ISO 2037:1992, 食品産業用ステンレス鋼管。
- ISO 2566-2:1984, スチール — 伸び値の変換 — 2: オーステナイト鋼。
- ISO 3205:1976, 推奨試験温度。
- ISO 3651-1:1976, オーステナイト系ステンレス鋼 — 粒界腐食に対する耐性の測定 — 1: 質量損失の測定による硝酸媒体での腐食試験 (ヒューイ試験)
- ISO 3651-2:1976, オーステナイト系ステンレス鋼 — 粒界腐食に対する耐性の測定 — 2: 銅削り屑が存在する硫酸/硫酸銅媒体中の腐食試験 (Monypenny Strauss test)
- ISO 4200:1991, 平端鋼管、溶接および継ぎ目なし — 寸法および単位長さあたりの質量の一般表。
- ISO/TR 4949:1989, 文字記号に基づく鋼名。
- ISO 5252:1991, 鋼管 - 公差システム。
- ISO 5730:1992, 溶接構造の固定シェル ボイラー (水管ボイラー以外)
- ISO 6759:1980熱交換器用シームレス鋼管。
- ISO 6761:1981, スチール チューブ — チューブの端部の準備と溶接用継手。
- ISO 6892:1984, 金属材料 - 引張試験。
- ISO 7438:1985, 金属材料 — 曲げ試験。
- ISO 7598:1988, ISO 7-1 に準拠したねじ込みに適したステンレス鋼チューブ。
- ISO 8492:1986, 金属材料 - チューブ - 平坦化試験。
- ISO 8493:1986, 金属材料 - チューブ - ドリフト膨張試験。
- ISO 8495:1986, 金属材料 - チューブ - リング拡張試験。
- ISO 8496:1986, 金属材料 - チューブ - リング引張試験。
- ISO 9302:1994, 圧力用のシームレスおよび溶接 (サブマージ アーク溶接を除く) 鋼管 - 油圧漏れ防止の検証のための電磁試験。
- ISO 9303:1989, 圧力用のシームレスおよび溶接 (サブマージ アーク溶接を除く) 鋼管 — 縦方向の欠陥を検出するための全周超音波検査。
- ISO 9304:1989, 圧力目的のためのシームレスおよび溶接 (サブマージ アーク溶接を除く) 鋼管 - 欠陥の検出のための渦電流試験。
- ISO 9305:1989, 圧力目的のシームレス鋼管 - 横方向の欠陥を検出するための全周超音波検査。
- ISO 9765:1990, 圧力目的のサブマージ アーク溶接鋼管 - 縦方向および/または横方向の欠陥を検出するための溶接シームの超音波検査。
- ISO/TR 9769:1991, 鋼鉄および鉄 — 利用可能な分析方法のレビュー。
- ISO 10332:1994, 圧力用のシームレスおよび溶接 (サブマージ アーク溶接を除く) 鋼管 - 油圧漏れ防止の検証のための超音波試験。
- ISO 10474:1991, 鉄鋼および鉄鋼製品 — 検査文書。
- ISO 11496:1993, 圧力目的のためのシームレスおよび溶接鋼管 - 層流の欠陥を検出するための管端の超音波検査。
- ISO 12096:1996, 圧力目的のためのサブマージ アーク溶接鋼管 - 欠陥の検出のための溶接シームの放射線検査。
- ISO 14284:1996, 鋼鉄および鉄 — 化学組成の決定のためのサンプルのサンプリングおよび準備。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9330-6 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 19, Technical delivery conditions for steel tubes for pressure purposes.
It constitutes a partial revision of ISO 2604-5:1978.
ISO 9330 consists of the following parts, under the general title Welded steel tubes for pressure purposes — Technical delivery conditions:
- Part 1: Unalloyed steel tubes with specified room temperature properties
- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
- Part 6: Longitudinally welded austenitic stainless steel tubes
Annexes A and B of this part of ISO 9330 are for information only.
1 Scope
1.1 This part of ISO 9330 specifies the technical delivery conditions for longitudinally welded tubes of circular cross-section, made of austenitic stainless steel, which are applied for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures. These tubes are intended for pressure purposes, for example, for the construction of pressure vessels, chemical plants and steam-generating equipment and for interconnecting pipe work.
Tubes manufactured in accordance with this part of ISO 9330 may have specified room temperature properties, specified low temperature toughness properties and specified proof-stress values at elevated temperatures, as appropriate to the service for which they are intended.
The requirements of appropriate International Standards covering applications (e.g. ISO 1129, ISO 2037, ISO 6759, ISO 7598) and relevant national legal regulations shall be taken into account by the user. For boilers and pressure vessels, ISO/R 831 and ISO 5730 are available.
NOTES
- 1 The word"tube" is synonymous with"pipe".
- 2 This part of ISO 9330 can also be used as a basis for the manufacture of tubes of non-circular section. In this case, the values quoted in this part of ISO 9330 for chemical analysis and mechanical properties are applicable. All other requirements are by agreement between the purchaser and manufacturer.
This part of ISO 9330 does not cover
- a) casing, tubing, drill pipe and linepipe for use by the oil and natural gas industries; and
- b) tubes for the transport of gas, water and sewage.
1.2 For the general technical delivery requirements, see ISO 404.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 9330. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 9330 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 148:1983, Steel — Charpy impact test (V-notch).
- ISO 377-1:1989, Selection and preparation of samples and test pieces of wrought steels — 1: Samples and test pieces for mechanical test.
- ISO 404: 1992, Steel and steel products — General technical delivery requirements.
- ISO 683-13:1986, Heat treatable steels, alloy steels and free cutting steels — 13: Wrought stainless steels.
- ISO 783:1989, Metallic materials — Tensile testing at elevated temperature.
- ISO/R 831:1968, Rules for construction of stationary boilers.
- ISO 1127:1992, Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length.
- ISO 1129:1980, Steel tubes for boilers, superheaters and heat exchangers — Dimensions, tolerances and conventional masses per unit length.
- ISO 2037:1992, Stainless steel tubes for the food industry.
- ISO 2566-2:1984, Steel — Conversion of elongation values — 2: Austenitic steels.
- ISO 3205:1976, Preferred test temperatures.
- ISO 3651-1:1976, Austenitic stainless steels — Determination of resistance to intergranular corrosion — 1: Corrosion test in nitric acid medium by measurement of loss in mass (Huey test).
- ISO 3651-2:1976, Austenitic stainless steels — Determination of resistance to intergranular corrosion — 2: Corrosion test in a sulphuric acid/copper sulphate medium in the presence of copper turnings (Monypenny Strauss test).
- ISO 4200:1991, Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length.
- ISO/TR 4949:1989, Steel names based on letter symbols.
- ISO 5252:1991, Steel tubes — Tolerance systems.
- ISO 5730:1992, Stationary shell boilers of welded construction (other than water-tube boilers).
- ISO 6759:1980, Seamless steel tubes for heat exchangers.
- ISO 6761:1981, Steel tubes — Preparation of ends of tubes and fitting for welding.
- ISO 6892:1984, Metallic materials — Tensile testing.
- ISO 7438:1985, Metallic materials — Bend test.
- ISO 7598:1988, Stainless steel tubes suitable for screwing in accordance with ISO 7-1.
- ISO 8492:1986, Metallic materials — Tube — Flattening test.
- ISO 8493:1986, Metallic materials — Tube — Drift expanding test.
- ISO 8495:1986, Metallic materials — Tube — Ring expanding test.
- ISO 8496:1986, Metallic materials — Tube — Ring tensile test.
- ISO 9302:1994, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness.
- ISO 9303:1989, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections.
- ISO 9304:1989, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Eddy current testing for the detection of imperfections.
- ISO 9305:1989, Seamless steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of transverse imperfections.
- ISO 9765:1990, Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections.
- ISO/TR 9769:1991, Steel and iron — Review of available methods of analysis.
- ISO 10332:1994, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the verification of hydraulic leak-tightness.
- ISO 10474:1991, Steel and steel products — Inspection documents.
- ISO 11496:1993, Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections.
- ISO 12096:1996, Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections.
- ISO 14284:1996, Steel and iron — Sampling and preparation of samples for the determination of chemical composition.