※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 9380 は、技術委員会 ISO/TC 162, ドアおよび窓によって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、ドアセットとそのハードウェアに繰り返されるねじれの影響を判断するために使用される方法を指定します。
これは、以下に定義する試験条件を念頭に置いて、完成した建物のように製造業者の推奨に従って設計および設置された通常の動作状態で、垂直にヒンジ付きのドアリーフを備えたあらゆる材料で作られたすべてのドアセットに適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part In the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 9380 was prepared by Technical Committee ISO/TC 162, Doors and windows.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies the method to be used to determine the effect of repeated torsion on doorsets and their hardware.
It applies to all doorsets made of any materials with vertically hinged doorleaves in their normal operating condition for which they are designed and installed according to the manufacturer's recommendations as in a finished building, bearing in mind the test conditions defined below.
Annex A
Bibliography
| ISO 1804:1972, Doors — Terminology. |